LOREX Technology DGN209 instruction manual Record Method

Page 16

Record Method

This feature is used to select the DVR record method as either EVENT / NORMAL / OFF.

1.Press ▲ / ▼ to select the desired time camera channel (1-9), then press ENTER.

2.Press ◄ / ► to select the Record Method feature on the screen.

3.Press ▲ / ▼ to select EVENT/ NORMAL/ OFF on the screen.

EVENT: When the alarm input is triggered, the DVR will increase the recording time to that channel.

i.e. the normal record sequence for cameras is Camera 1, Camera 2, Camera 3 etc. In Event mode, when an alarm in triggered from channel 1, the DVR will record using the following sequence: Camera 1, Camera 2, Camera 1, Camera 3, Camera 1, Camera 4 etc.

NORMAL: When an External Audible Alarm is triggered, the DVR will record normally as set up.

OFF: An Alarm Trigger will not cause the DVR to start recording.

4.Press MENU to confirm and exit the Record Method feature.

5.Press MENU again to exit the Camera Setup Option

16

Image 16
Contents Channel Multiplex Digital Video Recorder Copyright Lorex Technologies Inc Alden Road Markham, Ontario L3R 4C1 CanadaTable of Contents Page Important Safety Instructions Risk of Electric SHOCK. do not OpenFeatures IntroductionSystem Contents Getting StartedFront Panel Controls Play REW / LeftSlow Camera SelectBack Panel Connections Default Password is Accessing the Main MenuPassword, resets system settings, or clears the HDD Alarm List Last RecordFull List Time SearchTimer Day Start EndQuality IPS BEST, HIGH, NORMAL, BasicHDD Overwrite Setup Record IPS SetupRecord Quality Setup Alarm REC IPS SetupAlarm Polarity Motion Trigger RecordTitle DwellRecord Method Motion Detection Setup 1MOTION Detection Setup 1~9 Setting the External Audible Alarm Device Setting the Internal Audible Alarm BuzzerSelecting the Audio Input Channel Setting the Motion Audible Alarm feature Setting the Alarm DurationSetting the Dwell Time Setting the Message Latch FeatureSetting System Time & Date Changing the System PasswordResetting System to Factory Defaults Clearing the Hard Drive DataNetwork OperationOn Screen Display OSD Recording Methods Viewing OptionsVideo Search Playing Back VideoHardware Connection from DVR Static IP Setting Software Installation Static IP SettingPage Menu Search Timer Record Camera System Event Xnetwork Connecting the PC and DVR via the InternetStatic IP NetworkWhat is a Dynamic IP ADDRESS? Dynamic IP SettingSoftware Installation Dynamic IP Setting Connecting the PC to a Router / Router Login LAN endClick TwicePage SVC Adsl modem WAN end Reset Default noNetwork Server IP Backup Program Play the last record file Backup ProgramAddress Book Play last record fileSoftware Operation at the Remote Site Control Panel and Basic Operation Video Web Server control panelPlay Back Operation Digital device control panelTurbo TurboAdvanced Settings System Config Account AlarmReboot ApplyFTP MailFile Path Tool BOX Online UserPage Key Lock Troubleshooting Problem SolutionTCPIP, ICMP, SMTP, HTTP, FTP Technical SpecificationsYY/MM/DD, DD/MM/YY, MM/DD/YY, OFF Cartridge Casing Remove the Cartridge Casing from the DXR209Slide the top Cover over the Cartridge Casing Secure the HDD in the Cartridge CasingLock the Cartridge Appendix 2 Connection Diagram to Cameras and Monitor Alarm SensorAppendix 3 Pin Configurations Appendix 4 Rack Mount Installation Appendix 5 Recording Times in Hours Ntsc SystemManufacturer Model Capacity Rotation Appendix 6 Compatible HDD BrandsIt’s all on the web