LOREX Technology DGN209 instruction manual System Contents, Getting Started

Page 7

System Contents

The DXR209 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

DXR209 Digital Video Recorder

80 GB Hard Disk Drive is included

Installation / User Manual

2 Keys for

Power Adapter and Cord

Hard Drive Cartridge

NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE.

Getting Started

If the purchased DVR model did not contain a hard disk drive, please refer to Appendix #1 for HDD installation instructions.

1.Connect video sources and monitor(s) following the configuration example shown in Appendix # 2.

2.Connect the AC Power Cord to the Power Adapter and plug into an electrical outlet. A Red LED indicator light will be ON to indicate that the DVR is in Standby mode.

3.Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. Note: the system takes approximately 5 to 15 seconds to power up. During the power-up, you will see the following messages: “HDD Detecting”, followed by “Master HDD Connected”.

Once connected, the POWER LED will change to green, and the red indicator lights will be ON next to the Alarm and Timer buttons. (The Alarm and Timer LED’s simply indicate that these features are enabled)

NOTE: IF YOU GET THE MESSAGE “HDD NOT FOUND”, PLEASE SEE APPENDIX #1 AS THE HDD IS LIKELY NOT INSTALLED CORRECTLY.

7

Image 7
Contents Channel Multiplex Digital Video Recorder L3R 4C1 Canada Copyright Lorex Technologies Inc Alden Road Markham, OntarioTable of Contents Page Risk of Electric SHOCK. do not Open Important Safety InstructionsIntroduction FeaturesGetting Started System ContentsFront Panel Controls Camera Select PlayREW / Left SlowBack Panel Connections Default Password is Accessing the Main MenuPassword, resets system settings, or clears the HDD Time Search Alarm ListLast Record Full ListBEST, HIGH, NORMAL, Basic TimerDay Start End Quality IPSAlarm REC IPS Setup HDD Overwrite SetupRecord IPS Setup Record Quality SetupDwell Alarm PolarityMotion Trigger Record TitleRecord Method Motion Detection Setup 1MOTION Detection Setup 1~9 Setting the External Audible Alarm Device Setting the Internal Audible Alarm BuzzerSelecting the Audio Input Channel Setting the Message Latch Feature Setting the Motion Audible Alarm featureSetting the Alarm Duration Setting the Dwell TimeClearing the Hard Drive Data Setting System Time & DateChanging the System Password Resetting System to Factory DefaultsNetwork OperationOn Screen Display OSD Viewing Options Recording MethodsPlaying Back Video Video SearchSoftware Installation Static IP Setting Hardware Connection from DVR Static IP SettingPage Network Menu Search Timer Record Camera System Event XnetworkConnecting the PC and DVR via the Internet Static IPWhat is a Dynamic IP ADDRESS? Dynamic IP SettingSoftware Installation Dynamic IP Setting LAN end Connecting the PC to a Router / Router LoginTwice ClickPage SVC Adsl modem WAN end Reset Default noNetwork Server IP Play last record file Backup Program Play the last record fileBackup Program Address BookSoftware Operation at the Remote Site Video Web Server control panel Control Panel and Basic OperationTurbo Play Back OperationDigital device control panel TurboApply Advanced SettingsSystem Config Account Alarm RebootFTP MailFile Path Online User Tool BOXPage Key Lock Problem Solution TroubleshootingTCPIP, ICMP, SMTP, HTTP, FTP Technical SpecificationsYY/MM/DD, DD/MM/YY, MM/DD/YY, OFF Remove the Cartridge Casing from the DXR209 Cartridge CasingSlide the top Cover over the Cartridge Casing Secure the HDD in the Cartridge CasingLock the Cartridge Alarm Sensor Appendix 2 Connection Diagram to Cameras and MonitorAppendix 3 Pin Configurations Appendix 4 Rack Mount Installation Ntsc System Appendix 5 Recording Times in HoursAppendix 6 Compatible HDD Brands Manufacturer Model Capacity RotationIt’s all on the web