LOREX Technology DGN209 Static IP, Menu Search Timer Record Camera System Event Xnetwork, Network

Page 27

6.After the installation, the following files listed below will appear in your assigned path or file folder. There will be 6 files and 1 folder.

STEP 2: STATIC IP SETTING

In the DVR MENU / NETWORK set the IP ADDRESS, GATEWAY, NET MASK, DNS and WEB PORT as provided from your local ISP (internet service provider).

(MENU)

SEARCH

TIMER RECORD CAMERA SYSTEM EVENT

XNETWORK

Below is an example of the settings required:

(NETWORK)

SERVER IP 61.66138.74 GATEWAY 61.66.138.254 NET MASK 255.255.255.000

DNS 168.095.001.001 WEB PORT 00080 RESET DEFAULT NO

When all of the network settings are finished, connect the DVR to the internet (computer).

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

POWER

EXTERNAL I/O

LOOP

HI INPUT

75Ω

MAIN

INOUT

LAN

13R

ACT

LINK

CALL 24L

Static IP

STEP 3: Connecting the PC and DVR via the Internet

1.To configure the Server IP, please click twice to enter the setup.

2.Key in the User Name, Password, and Server IP (The default setting for the User Name is admin and the default Password is admin ; Server IP is the address that you set in Step 2). Click on OK to connect.

27

Image 27

Contents Channel Multiplex Digital Video Recorder L3R 4C1 Canada Copyright Lorex Technologies Inc Alden Road Markham, OntarioTable of Contents Page Risk of Electric SHOCK. do not Open Important Safety InstructionsIntroduction FeaturesGetting Started System ContentsFront Panel Controls Camera Select PlayREW / Left SlowBack Panel Connections Accessing the Main Menu Default Password isPassword, resets system settings, or clears the HDD Time Search Alarm ListLast Record Full ListBEST, HIGH, NORMAL, Basic TimerDay Start End Quality IPSAlarm REC IPS Setup HDD Overwrite SetupRecord IPS Setup Record Quality SetupDwell Alarm PolarityMotion Trigger Record TitleRecord Method Motion Detection Setup 1MOTION Detection Setup 1~9 Setting the Internal Audible Alarm Buzzer Setting the External Audible Alarm DeviceSelecting the Audio Input Channel Setting the Message Latch Feature Setting the Motion Audible Alarm featureSetting the Alarm Duration Setting the Dwell TimeClearing the Hard Drive Data Setting System Time & DateChanging the System Password Resetting System to Factory DefaultsOperation NetworkOn Screen Display OSD Viewing Options Recording MethodsPlaying Back Video Video SearchSoftware Installation Static IP Setting Hardware Connection from DVR Static IP SettingPage Network Menu Search Timer Record Camera System Event XnetworkConnecting the PC and DVR via the Internet Static IPDynamic IP Setting What is a Dynamic IP ADDRESS?Software Installation Dynamic IP Setting LAN end Connecting the PC to a Router / Router LoginTwice ClickPage SVC Reset Default no Adsl modem WAN endNetwork Server IP Play last record file Backup Program Play the last record fileBackup Program Address BookSoftware Operation at the Remote Site Video Web Server control panel Control Panel and Basic OperationTurbo Play Back OperationDigital device control panel TurboApply Advanced SettingsSystem Config Account Alarm RebootMail FTPFile Path Online User Tool BOXPage Key Lock Problem Solution TroubleshootingTechnical Specifications TCPIP, ICMP, SMTP, HTTP, FTPYY/MM/DD, DD/MM/YY, MM/DD/YY, OFF Remove the Cartridge Casing from the DXR209 Cartridge CasingSecure the HDD in the Cartridge Casing Slide the top Cover over the Cartridge CasingLock the Cartridge Alarm Sensor Appendix 2 Connection Diagram to Cameras and MonitorAppendix 3 Pin Configurations Appendix 4 Rack Mount Installation Ntsc System Appendix 5 Recording Times in HoursAppendix 6 Compatible HDD Brands Manufacturer Model Capacity RotationIt’s all on the web