LOREX Technology DGN209 instruction manual Appendix 3 Pin Configurations

Page 48

Appendix 3: Pin Configurations

25 Pin Com Port

DVR

EXTERNAL ALAM NO

EXTERNAL ALARM COM

PIN OFF

ALARM INPUT 9

ALARM INPUT 10

ALARM INPUT 11

ALARM INPUT 12

ALARM INPUT 13

ALARM INPUT 14

ALARM INPUT 15

ALARM INPUT 16

ALARM INPUT 1

ALARM INPUT 2

ALARM INPUT 3

ALARM INPUT 4

ALARM INPUT 5

ALARM INPUT 6

ALARM INPUT 7

ALARM INPUT 8

PIN OFF

GND

GND	GROUND	PIN 1

ALARM INPUT	To connect wire from ALARM INPUT (PIN 2 -- 9; PIN 15-22)to GND	PIN 2-9;
	(PIN 1) connector, DVR will start recording and buzzer will sound.	PIN 15-22
	¾ When Menu / Camera / Alarm is set to “Low”: the unit starts to
	record and the buzzer sounds.
	¾ When Menu / Camera / Alarm is set up to “High”: the unit starts to
	record and the buzzer sounds.

PIN OFF	----	PIN 10,14

EXTERNAL ALARM NO	Under normal operations COM disconnects with NO. When the Alarm is	PIN13
	triggered, COM connects with NO.

EXTERNAL ALARM COM	Under normal operations COM disconnects with NO. When the Alarm is	PIN 25
	triggered, COM connects with NO.

		48

Image 48

Contents Channel Multiplex Digital Video Recorder Copyright Lorex Technologies Inc Alden Road Markham, Ontario L3R 4C1 CanadaTable of Contents Page Important Safety Instructions Risk of Electric SHOCK. do not OpenFeatures IntroductionSystem Contents Getting StartedFront Panel Controls Play REW / LeftSlow Camera SelectBack Panel Connections Accessing the Main Menu Default Password isPassword, resets system settings, or clears the HDD Alarm List Last RecordFull List Time SearchTimer Day Start EndQuality IPS BEST, HIGH, NORMAL, BasicHDD Overwrite Setup Record IPS SetupRecord Quality Setup Alarm REC IPS SetupAlarm Polarity Motion Trigger RecordTitle DwellRecord Method Motion Detection Setup 1MOTION Detection Setup 1~9 Setting the Internal Audible Alarm Buzzer Setting the External Audible Alarm DeviceSelecting the Audio Input Channel Setting the Motion Audible Alarm feature Setting the Alarm DurationSetting the Dwell Time Setting the Message Latch FeatureSetting System Time & Date Changing the System PasswordResetting System to Factory Defaults Clearing the Hard Drive DataOperation NetworkOn Screen Display OSD Recording Methods Viewing OptionsVideo Search Playing Back VideoHardware Connection from DVR Static IP Setting Software Installation Static IP SettingPage Menu Search Timer Record Camera System Event Xnetwork Connecting the PC and DVR via the InternetStatic IP NetworkDynamic IP Setting What is a Dynamic IP ADDRESS?Software Installation Dynamic IP Setting Connecting the PC to a Router / Router Login LAN endClick TwicePage SVC Reset Default no Adsl modem WAN endNetwork Server IP Backup Program Play the last record file Backup ProgramAddress Book Play last record fileSoftware Operation at the Remote Site Control Panel and Basic Operation Video Web Server control panelPlay Back Operation Digital device control panelTurbo TurboAdvanced Settings System Config Account AlarmReboot ApplyMail FTPFile Path Tool BOX Online UserPage Key Lock Troubleshooting Problem SolutionTechnical Specifications TCPIP, ICMP, SMTP, HTTP, FTPYY/MM/DD, DD/MM/YY, MM/DD/YY, OFF Cartridge Casing Remove the Cartridge Casing from the DXR209Secure the HDD in the Cartridge Casing Slide the top Cover over the Cartridge CasingLock the Cartridge Appendix 2 Connection Diagram to Cameras and Monitor Alarm SensorAppendix 3 Pin Configurations Appendix 4 Rack Mount Installation Appendix 5 Recording Times in Hours Ntsc SystemManufacturer Model Capacity Rotation Appendix 6 Compatible HDD BrandsIt’s all on the web