LOREX Technology DGN209 instruction manual Motion Detection Setup

Page 17

Motion Detection

The Motion Detect feature provides a visual indication on the monitor when movement is detected in the picture. Also, if the ‘Motion Trigger Record’ option is enabled in the ‘Record’ menu, recording will activate on all cameras when motion is detected. Use the steps below to enable/disable the detection zones for each camera.

Press MENU to enter the menu set up, then ▼ to CAMERA setup.

Press ENTER twice to enter the Motion Detection setup.

Each screen displays the current camera picture overlaid with the motion targets (as Figure 1). Pressing the ◄ / ►, ▲ / ▼ buttons will toggle the motion detection between ON or OFF.

The targets on each motion setup can be turned to ON or OFF individually by row. To set up targets, using the following front panel buttons:

1.Press ENTER to confirm the channel.

2.Press ENTER to enter motion mode.

3.moves the target cursor up one row at a time.

4.moves the target cursor down one row at a time.

5.moves the target cursor left one column at a time.

6.moves the target cursor right one column at a time.

7.Press ENTER to turn the target cursor ON.

Press ENTER again to turn the target cursor OFF.

8.Camera Select (1-15)toggles the corresponding target on the cursor line ON or OFF. (see Figure 1.1) There are only 15 targets in a row, therefore; only Camera Selected (1-15) can be operated.

9.Zoom: turns all targets in the current row ON or OFF. (Figure 1-2)

10.PIP: turns all targets on the screen ON or OFF. (Figure 1-3)

Press SLOW button to setup the Sensitivity list up to 255

1.Press REC button to setup the Sensitivity list down to 000.

2.Sensitivity value is related to motion and brightness change.

3.Low value (as 001) means higher sensitivity on motion and brightness change.

4.High value (as 255) means lower sensitivity on motion and brightness change.

User can choose the suitable sensitivity value in different locations. The default value is set on 32.

Figure 1 MOTION DETECTION SETUP

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

032

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

17

Image 17
Contents Channel Multiplex Digital Video Recorder L3R 4C1 Canada Copyright Lorex Technologies Inc Alden Road Markham, OntarioTable of Contents Page Risk of Electric SHOCK. do not Open Important Safety InstructionsIntroduction FeaturesGetting Started System ContentsFront Panel Controls REW / Left PlaySlow Camera SelectBack Panel Connections Password, resets system settings, or clears the HDD Accessing the Main MenuDefault Password is Last Record Alarm ListFull List Time SearchDay Start End TimerQuality IPS BEST, HIGH, NORMAL, BasicRecord IPS Setup HDD Overwrite SetupRecord Quality Setup Alarm REC IPS SetupMotion Trigger Record Alarm PolarityTitle DwellRecord Method Motion Detection Setup 1MOTION Detection Setup 1~9 Selecting the Audio Input Channel Setting the Internal Audible Alarm BuzzerSetting the External Audible Alarm Device Setting the Alarm Duration Setting the Motion Audible Alarm featureSetting the Dwell Time Setting the Message Latch FeatureChanging the System Password Setting System Time & DateResetting System to Factory Defaults Clearing the Hard Drive DataOn Screen Display OSD OperationNetwork Viewing Options Recording MethodsPlaying Back Video Video SearchSoftware Installation Static IP Setting Hardware Connection from DVR Static IP SettingPage Connecting the PC and DVR via the Internet Menu Search Timer Record Camera System Event XnetworkStatic IP NetworkSoftware Installation Dynamic IP Setting Dynamic IP SettingWhat is a Dynamic IP ADDRESS? LAN end Connecting the PC to a Router / Router LoginTwice ClickPage SVC Network Server IP Reset Default noAdsl modem WAN end Backup Program Backup Program Play the last record fileAddress Book Play last record fileSoftware Operation at the Remote Site Video Web Server control panel Control Panel and Basic OperationDigital device control panel Play Back OperationTurbo TurboSystem Config Account Alarm Advanced SettingsReboot ApplyFile Path MailFTP Online User Tool BOXPage Key Lock Problem Solution TroubleshootingYY/MM/DD, DD/MM/YY, MM/DD/YY, OFF Technical SpecificationsTCPIP, ICMP, SMTP, HTTP, FTP Remove the Cartridge Casing from the DXR209 Cartridge CasingLock the Cartridge Secure the HDD in the Cartridge CasingSlide the top Cover over the Cartridge Casing Alarm Sensor Appendix 2 Connection Diagram to Cameras and MonitorAppendix 3 Pin Configurations Appendix 4 Rack Mount Installation Ntsc System Appendix 5 Recording Times in HoursAppendix 6 Compatible HDD Brands Manufacturer Model Capacity RotationIt’s all on the web