LOREX Technology L164, L174V instruction manual Camera Options, Event LOG

Page 15

NOTE : Higher quality recording consumes more memory on your HDD. Appendix#3 shows the different recording speed associated with the type of setting that you select

(iii)RECORD FPS: Allows you to set the Frames Per Second for recording. Available FPS

settings are: 1, 2, 4, 5, 7, 10, 15, 30. 1 FPS is the slowest speed; it will allow for the longest recording durations as it records less information. Please refer to Appendix #2 for the different recording times

(iv)RECORD CAMERA 1 – RECORD CAMERA 4: Allows you to select the camera ON or OFF for recording

5.CAMERA OPTIONS

This submenu allows you to set up the camera you want to display and the TITLE

(i)CAMERA 1–4: Select the camera(s) that you want to record

(ii)TITLE: Select whether the Title Set for the camera is ON or OFF

(iii)TITLE SET: Assign a title to each camera (Max: 8 characters). Initially each title is the camera’s number. (Example: CH 1)

Note: the button ”Select” = ^ , ”Stop” = v direction. Valid characters are:A~Z,1~9,+,-,/,: ,etc

 

CAMERA SELECT

CAMERA 1

ON

CAMERA 2

ON

CAMERA 3

ON

CAMERA 4

ON

TITLE

ON

TITLE SET

 

PRESS ( cd), THEN (SELECT)

PRESS (MENU) TO EXIT

6.EVENT LOG

The event log keeps a record of all errors and alarms that may occur on the DVR. Each of these are stored with a Time/Date Stamp. A single page can display up to 10 alarm recorded events. Press “” + “”(UP and DOWN) buttons and then press the SELECT button to DELETE ALL EVENTS to clear the EVENT record. A password will need to be entered at this point.

(i) VIDEO LOSS: Records Information when

 

EVENT LOG

 

 

the camera is disconnected or removed

VIDEO LOSS

00

on any of the 4 channel inputs.

POWER LOSS

09

(ii) POWER LOSS: Records information

HDD ERROR

00

when there’s any interruption in the

ALARM

06

main power. Up to 9 power loss events

HDD FULL

00

can be displayed.

DELETE ALL EVENTS

(iii) HDD ERROR: An error message will be

 

 

displayed if the HDD cartridge was not

 

 

inserted properly or not locked with the

 

 

key. (Please see the troubleshooting

PRESS ( cd), THEN (SELECT)

chart )

PRESS (MENU) TO EXIT

(iv)ALARM: Records all alarm events. Up to 6 events can be recorded

(v) HDD FULL: Will display when the HDD has reached its maximum capacity

-11-

Image 15
Contents Channel DVR Risk of Electric SHOCK. do not Open FCC Class B Notice Contents General Precautions Page CABLES, 4 RCA-RCA System IncludesChannel DVR Keys forGetting Started Control Front Panel Page Alarm Back PanelVideo Output Schedule Setting Main Menu ControlTIME/DATE Master password is 111111, and the user Password isPlease Note Record Setting SENSOR/ALARMEvent LOG Camera OptionsAdvanced Menu AdvancedVGA Options System InfoOperation Camera SelectRecording Schedule Rec Event Alarm Rec EventSearch Menu Total EventPlayback Menu KEY LockKEY Function Description Remote ControlMonitor Connection Camera InstallationDVR Video VCR Out Video/ VCR Example 3 Connect a PC monitor LCD or CRT to the L174V DVR Connection to a monitor for viewing Monitor & VCR InstallationConnect L164 to a Typical Lorex Monitor Back of Lorex Observation MonitorBack of L164 DVR Back of TFT LCD Monitor Back of L174V DVR Connect L174V to a Typical Lorex MonitorProblem Solution TroubleshootingAlarm Technical SpecificationsVideo Signal Recording ModeSpecialty Cameras Time Lapse VCR Optional AccessoriesAppendix #1 Installing the HDD Connect the HDD into the Cartridge Casing Lock the Cabinet Appendix #2 -THE Internal HDD Appendix #3 Recording Time in Hours Recording Quality Frame Rate LOW ResolutionCare and Maintenance It’s all on the web