7. ADVANCED |
|
|
|
|
|
|
|
| |
Menu settings such as changing & enabling |
|
|
|
|
the master and user password, loading the |
|
|
|
|
default settings, overwriting the HDD and |
|
|
|
|
clearing the Master and Slave HDD can |
|
|
|
|
be done. |
| PASSWORD INPUT(6): _ _ _ _ _ _ |
| |
The default MASTER password (Password |
|
|
|
|
Input (6): _ _ _ _ _ _ ) for the DVR is 111111, |
|
|
|
|
and should be entered to get into the |
|
|
|
|
Advanced Menu. After entering the |
|
|
|
|
correct password, the monitor will |
|
|
|
|
display the words, “Password Correct” |
|
|
|
|
Note: If all master and user passwords are |
|
|
|
|
|
|
|
| |
disabled, this menu will not display |
|
|
|
|
again. |
| ADVANCED MENU |
|
|
Advanced Menu |
|
|
|
|
(i) CHANGE MASTER PASSWORD: To |
| CHANGE MASTER PASSWORD |
|
|
change the master password you will |
| CHANGE USER PASSWORD |
|
|
need to enter the “Current Password”, the |
| MASTER PASSWORD ENABLE | OFF |
|
“New Password”, and the confirmation of |
| USER PASSWORD ENABLE | OFF |
|
the password. The default master |
| DEFAULT SETTING |
|
|
| OVERWRITE ENABLED | [YES] |
| |
password is 111111. When you have |
|
| ||
| MASTER HDD CLEAR |
|
| |
entered the current password and you are |
| SLAVE HDD CLEAR | N/A |
|
ready to enter the new password and |
| LOAD DEFAULT Y/N? |
|
|
confirmation password do not press the |
|
|
| |
UP or Down arrow keys to move down, |
| PRESS ( cd), THEN (SELECT) |
| |
since the DVR will take this as a character |
|
| ||
| PRESS (MENU) TO EXIT |
|
| |
(ii) CHANGE USER PASSWORD: To |
|
|
| |
|
|
|
| |
|
|
|
|
change the user password you will
need to enter the “Current Password”, the “New Password”, and the confirmation of the password. The default user password is 222222.
When you have entered the current password and you are ready to enter the new password and confirmation password do not press the UP or Down arrow keys to move down, since the DVR will take this as a character
(iii) MASTER PASSWORD ENABLE:
Press the select button to enable (ON) or disable (OFF) (iv) USER PASSWORD ENABLE:
Press the select button to enable (ON) or disable (OFF)
(v) DEFAULT SETTING: If this is selected then the DVR will load all the original default settings, such as schedule, sensor/alarm, etc. You will be asked whether you’d like to load the default (YES) or (NO)
(vi) OVERWRITE ENABLED: When enabled (YES), recording will continue uninterrupted when the HDD is full. The previous recording will be Overwritten in a “first in, first out” basis. When disabled (NO), recording will stop when the HDD fills up. It will then need to be cleared in order for recording to continue.