MONITOR CONNECTION :
To display the recorded video from the DVR on the monitor
1)Connect the video output from the DVR to the video input of the monitor (there should be a selector switch on the quad monitor that indicates VCR).
2)Press the selector switch for VCR on the monitor. Selecting VCR causes the DVR functions to override the quad monitor functions.
This connection procedure will allow you to use all of the functions of the DVR.
Example 2.2: Connect a Quad monitor without (looping) video outputs
In this example the quad monitor does not have looping video outputs for each channel.
Cameras
Back of Monitor
(not included)
Video/
VCR Out
Video In | Video/ VCR In |
DVR
Video Out
A quad monitor without looping video outputs for each channel should have a video output labeled VCR out
To display the recorded video from the DVR on the monitor
1)Connect the VCR output (video output) from the quad monitor to channel 1 video input on the DVR.
2)Select VCR on the front panel of the monitor. You will then be able to view recorded video.