9.SHUTTLE RING – REV/ PAUSE/ FF – This shuttle ring has three functions:
1)REV : During playback, turn this button counterclockwise to rewind 10 seconds back
2)PAUSE: Pauses video during playback
3)FF : During playback, turn this button clockwise to Fast Forward the video 4X the speed
FF1: 2 x Forward Speed FF2: 3 x Forward Speed FF 3: 4 x Forward Speed
10.POWER BUTTON – Press the “POWER” button to turn the DVR “ON” , and press and hold for about 2 seconds to turn the DVR “OFF”.
11.STOP – Use this button to stop recording or playback.
12.QUAD BUTTON – Switches from a full screen mode to a QUAD screen mode on the monitor
13.CAMERA SELECT
14.LED INDICATORS – Represents the status of operation
(1)POWER : LED comes on when there’s power to the unit
(2)ALARM : LED will be ON when the ALARM function is triggered.
When an ALARM event is detected, the LED will be ON for the duration. Press any key and the Alarm LED will turn off. If you want to disable the
ALARM LED light function , please refer to page 10 and set the ALARM mode as OFF
(3)HDD : Blinks when the HDD is being accessed (via recording or playback)
(4)REC / : Green LED comes ON when recording is in progress.
HDD Full : Red LED comes ON when HDD is full
Note: If you perform a REV to FF function, during the 1st FF the playback will pause and the FF function will activate during the 2nd FF.