Panasonic PV 9D53 manual TV operation, Catv Mode Direct Channel Selection

To turn on the TV/DVD, press POWER. Press TV to select TV mode.

TV operation

NOTES:

•If a channel with no broadcast is selected, the sound will automati- cally be muted.

•If a station being viewed stops broadcasting, the TV will automati- cally shut itself off after 15 minutes.

1

2 Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do

the number of bars. If the volume VOLUME 32 decreases, the number of green

bars also decreases.

Set the TV/CATV menu
3 option to the appropriate	TV - VHF/UHF channels
position. (See page 19.)	CATV - CABLE TV channels

4 Press the Direct Channel selection buttons to select the channel.

CH 012

TV Mode Direct Channel Selection When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.

CATV Mode Direct Channel Selection

When the TV/CATV menu option is in the CATV position, channels can be selected as follows:

TO SELECT CATV CHANNELS:

1-9: Press “0” twice, then 1-9 as needed. Example, to select channel 2, press "002".

10-12: Press “0”, then the remaining 2 digits. Example, to select channel 12, press "012".

13-99: Press the 2 digits in order. Example, to select channel 36, press "36".

100-125: Press the 3 digits in order. Example, to select channel 120, press "120".

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV	CATV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36
	(A) (W)
	37-59
	(AA) (WW)
	60-85
	(AAA) (ZZZ)
	86-94
	(86) (94)
	95-99
	(A-5) (A-1)
	100-125
	(100) (125)
	01
	(5A)

16