Mintek SBC RU760 Instructions for use Installing the remote control, Inserting the batteries

Page 4

RU760.qxd 04-06-2004 16:59 Pagina 4

English

Instructions for use

2.Installing the remote control

Inserting the batteries

1 Press the cover inwards and slide it in the direction of the arrow.

2Place two R6 AA type batteries into the battery compartment, as shown.

3Slide the cover back and click it firmly into place.

Testing the remote control

The remote control has been programmed to operate most Philips appliances. Because the RU760 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your appliance responds to the RU760.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (DVD,VCR, etc.) which you want to operate using the RU760.

Example of TV:

1Turn your TV on manually or use the original remote control. Tune to channel 1.

2Use the RU760’s mode selector to select TV.

 

Press the SELECT key until the green light

 

 

 

 

around the Standby key lights up.

VCR DVD SAT AMP CD

 

To select the other devices press the SELECT

 

 

 

 

 

key several times until the label of the device

LEARN

SELECT

GUIDE

 

TITLE

AUDIO CHAPTER SUBTITLE

 

you want to operate, lights up.

 

 

 

 

If neither the Standby key nor one of the labels light up, check whether the

 

batteries are properly inserted (see ‘Inserting the batteries’).

 

3

Check whether all the keys are working.

AV

 

P P

 

For an overview of the keys and their

 

 

 

 

functions see ‘3. Keys and functions’.

 

 

 

If the TV responds as it should to all of the

 

 

 

 

key commands the RU760 is ready for use.

 

SOURCE

 

 

TV

VCR

DVD

 

1

2

3

 

 

 

 

AUX

TUNER

CD

If the device does not respond at all or not to all of the key commands, follow the instructions under

‘Setting the remote control’.

4

Image 4
Contents SBC RU 760/00 VCR DVD SAT AMP CD Instructions for use ContentsIntroduction Instructions for use Installing the remote control Testing the remote controlInserting the batteries Example of TVSetting the remote control Keep the Learn key pressed for 5 secondsAutomatically setting the remote control Press the Standby key of the RU760 brieflyRU760 has now found a code that works on your TV Automatic programming of a TV takes a maximum of 3 minutesInstructions for use Keys and functions Select the required mode with Select key, e.g. DVD mode Instructions for use Extra possibilities Programming MacrosExample ‘Watching DVD’ macro Press keys 9, 9 and 1, in that orderLearn a key Example for VCRSwitch backlighting on or off Reset a keyTurn on the backlighting Turn off the backlightingCopy a device mode Reset all functions in a device modeAssign Volume control to another mode Volume controls work with TVVolume controls work with amplifier/ receiver Press the Select key twice to confirmRestoring all original functions Add a specific function to your remote controlPress keys 9, 8 and 1, in that order Instructions for use Troubleshooting Need help?Codes 134135 136 RCARFT SBR137 138 NEC139 140 141 142 HCMMCS NADHelpline Italia United Kingdom 0207Equipment Brand Model number Number of original remote Code Suisse/die SchweizGuarantee Certificado deCertificate Certificado de Certificat de