Mintek SBC RU760 manual Instructions for use Extra possibilities Programming Macros

RU760.qxd 04-06-2004 16:59 Pagina 8

English

Instructions for use

4.Extra possibilities Programming Macros

A macro allows you to automate actions you have to do frequently with your remote control. E.g. if you want to watch a DVD, you have to turn on the DVD, turn on the TV, turn on the receiver/amplifier, select the DVD input channel on your amplifier and start playing the DVD.The different keys you have to press to do this, can be stored under one single key. So you only have to press one button to start up your system for watching a DVD.

Example ‘Watching DVD’ macro:

1Select the required mode with the

SELECT key, e.g. DVD mode.

VCR	SAT AMP CD
LEARN	SELECT GUIDE
TITLE	AUDIO CHAPTER SUBTITLE

2Press keys 1 and 6 of the RU760 simultaneously for 5 seconds until the DVD label blinks twice and then remains lit.

3Press keys 9, 9 and 1, in that order.

SOURCE

TVVCRDVD

1 2 3

AUX TUNER CD

4 5 6

7	8	9
SHIFT	0
1	2	3
AUX	TUNER	CD

4 5 6

7 8 9

SHIFT0

4	Press the key under which you want to	OK
	store the macro, e.g. the P( P key.
	Notes:	P P
–	AV
	Once a macro is stored under a key, the original
	function of the key can not be used anymore.

–You can also store the macro by pressing Shift

in combination with a target key (the target key keeps its original function).

–You cannot store a macro under the SELECT, LEARN or SHIFT key.

5Enter the sequence of keys to be stored, e.g.:

•Select DVD mode with SELECT key and press the Standby key.

•Select TV mode with SELECT key and press 1.

•Select AMP mode with SELECT key and press the Standby key.

•Select DVD mode with SELECT key and press 1.

6To close the macro press the LEARN key.

– The DVD label blinks twice to confirm.

•	If you now select DVD mode and press
	the P( P key, the remote will switch on the	VCR DVD SAT AMP CD
	DVD, the TV and the AMP and starts playing	LEARN	SELECT GUIDE
	the disc.	TITLE	AUDIO CHAPTER SUBTITLE
		DISC	SYST.MENU
		MENU	BACK

8