Mintek SBC RU760 manual Learn a key, Example for VCR

Page 9

RU760.qxd 04-06-2004 16:59 Pagina 9

Instructions for use

Learn a key

IIf you miss certain functions from your original remote control of the RU760, the RU760 can learn these functions from the original remote.

You can store a fuction under any of the available keys of the RU760, except LEARN, SELECT and SHIFT. Please, note that any function already stored under a key will be deleted.

Example for VCR:

Make sure you have the original VCR remote control at hand.

1Select the device mode VCR, with the

SELECT key.

DVD SAT AMP CD

LEARN SELECT GUIDE

TITLE

AUDIO CHAPTER SUBTITLE

English

2Press the LEARN key and the target key on the RU760 simultaneously for 5 seconds, until the VCR label blinks twice and remains lit.

3Place both remote controls on a flat surface (like a coffee table) and aim them head-to- head with about 10cm in between.

DVD SAT AMP CD

LEARN SELECT GUIDE

TITLE

AUDIO CHAPTER SUBTITLE

DISC

SYSTMENU

10 cm.

4Press the button you want to copy on the original remote control.

– If the RU760 has learned the code, the VCR label will blink twice to confirm the signal is stored.

– If the VCR light blinks once for a longer period, the IR signal is not learned by the RU760. Please, try a few times and make sure the remotes are aligned as described in step 3.

If the RU760 cannot learn the code after several times trying, it is possible that:

The IR signal of your original device is out of range (the RU760 can only learn IR signals with a carrier signal of 30-60kHz.

The memory of the RU760 is full.

The RU760 stopped the learning process after 20 seconds if no

IR signals are found. Check if your original remote control is working correctly.

9

Image 9
Contents SBC RU 760/00 VCR DVD SAT AMP CD Contents Instructions for useIntroduction Testing the remote control Instructions for use Installing the remote controlInserting the batteries Example of TVKeep the Learn key pressed for 5 seconds Setting the remote controlPress the Standby key of the RU760 briefly Automatically setting the remote controlRU760 has now found a code that works on your TV Automatic programming of a TV takes a maximum of 3 minutesInstructions for use Keys and functions Instructions for use Extra possibilities Programming Macros Select the required mode with Select key, e.g. DVD modeExample ‘Watching DVD’ macro Press keys 9, 9 and 1, in that orderExample for VCR Learn a keyReset a key Switch backlighting on or offTurn on the backlighting Turn off the backlightingReset all functions in a device mode Copy a device modeVolume controls work with TV Assign Volume control to another modeVolume controls work with amplifier/ receiver Press the Select key twice to confirmAdd a specific function to your remote control Restoring all original functionsPress keys 9, 8 and 1, in that order Need help? Instructions for use Troubleshooting134 Codes135 RCA 136RFT SBR137 NEC 138139 140 141 HCM 142MCS NADItalia United Kingdom 0207 HelplineEquipment Brand Model number Number of original remote Code Suisse/die SchweizCertificado de GuaranteeCertificate Certificado de Certificat de