TV/VCR SECTION
SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE
FIRST TIME
TV/VCR
1Plug in the TV/DVD/VCR power
cord
Plug the TV/DVD/VCR power cord into a standard AC outlet.
NOTE:
•If some digits appear in the corner of
the screen, press the POWER button without unplugging the power cord.
DELETING (OR ADDING)
CHANNEL
TV/VCR
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
1 Select “CHANNEL SET UP” |
|
Press the SETUP button on the | TIMER PROGRAMMING |
| - TV/VCR SETUP - |
remote control. | SETTING CLOCK |
B CHANNEL SET UP | |
| USER’S SET UP |
Press the Arrow button K or L to | |
LANGUAGE [ENGLISH] | |
point to “CHANNEL SET UP”. | CAPTION [OFF] |
ZERO RETURN | |
TIME SEARCH | |
| INDEX SEARCH |
2Turn on the TV/DVD/VCR
Press the POWER button to turn on the TV/DVD/VCR.
3Select “ENGLISH” or “ESPAÑOL” or
“FRANÇAIS” | – SET UP – |
|
Select “ENGLISH” or | B LANGUAGE |
|
[ENGLISH] ESP | FRA | |
“ESPAÑOL”=Spanish or | AUTO PRESET |
|
“FRANÇAIS” =French using the |
|
|
ENTER button. “[ ]” indicate the |
|
|
selected language. |
|
|
|
|
|
4 Begin auto preset | – SET UP – |
|
Press the Arrow button K or L to | LANGUAGE |
|
point to “AUTO PRESET”. | [ENGLISH] ESP | FRA |
|
| |
Then press the ENTER button. | B AUTO PRESET |
|
|
| |
The tuner scans and memorizes all |
|
|
active channels in your area. |
|
|
NOTES: |
|
|
•The TV/DVD/VCR distinguishes between standard TV channels and cable channels.
•If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 16.
•The TV/DVD/VCR may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better.
Then, press the ENTER button.
2 Select “ADD/DELETE CH” | – CHANNEL SET UP – |
| |
Press the Arrow button K or L to | B ADD / DELETE CH (TV) |
AUTO PRESET | |
point to “ADD/DELETE CH”. |
|
Press the ENTER button. |
|
3Enter the desired channel number
Press the Arrow button Kor Luntil your desired channel number appears.
(You can also use the number buttons | 08 |
| |
or the CHANNEL buttons K/Lto | ADD / DELETE |
enter it) (Example: CH8) |
|
4Delete (or add) it from (into) memory
Press the ENTER button. The channel number changes to light red. The channel is deleted from memory.
Added channel: Light blue.
Deleted channel: Light red.
•To delete another channel, repeat steps [3] and [4].
•If you press the ENTER button again, the channel is memorized again.
•Press the RETURN button to return to TV/VCR SETUP MENU.
5Exit the channel setup mode
5 After scanning |
| Press the SETUP button on the remote control to |
|
The tuner stops on the lowest memorized channel. |
| returns to TV mode. |
|
| NOTE: To confirm that channel(s) has been deleted | ||
If you want to recall the selected channels, you can |
| ||
| or added, press the CHANNEL button K or L. |
| |
select the desired channel directly with the remote con- |
| ||
|
| ||
trol number buttons or the CHANNEL button K or L. | - 15 - | EN | |
|
1C29