Emerson EWC27T3, EWC19T3, EWC19T3, EWC27T3 owner manual Playback

PLAYBACK

NORMAL PLAYBACK SLOW MOTION

TV/VCR

TV/VCR

Make sure ...			During pause, press the FWD button to reduce the
• TV/DVD/VCR power must be turned on.			playback speed. The TV/DVD/VCR mutes the sound
			during slow motion. Press the PLAY button to return
			to normal playback.
1 Insert a prerecorded tape
			NOTE: If it is left in the Slow mode for more than
If the erase-protection tab has been removed, the			five minutes, the TV/DVD/VCR will automatically
TV/DVD/VCR will start playback automatically.			go into the Stop mode.
			PICTURE SEARCH
2 To begin playback	PLAY B
Press the PLAY button.
				TV/VCR
			This feature is very useful in finding or skipping over
			a particular scene on a tape. In this mode, the sound
			will be muted.
			1)You may view a video tape at a high speed in
3 To stop playback
	STOP		either a forward or reverse direction by pressing
Press the STOP button when play-			the F.FWD or REW button during playback. (in the
back is completed.			SP / LP / SLP modes)
			NOTE:
			•
			If you press the F.FWD or REW button on the
NOTES:			front panel in the DVD mode, the VCR forward
			or reverse will start. Please press the STOP /
• If you press the PLAY button (of the TV/VCR side)
			EJECT button once to stop it, twice to eject it.
in the DVD mode, you can start the VCR playback.			2)Press it again and the TV/DVD/VCR will now search
• If you press the SELECT button in the VCR play-
			in super high speed. (in the LP / SLP modes only)
back, it will stop and the mode will change to the			NOTE:
DVD mode. In addition, the same function oper-			• Tapes recorded in the SP or LP mode will dis-
ates with the DVD side PLAY button or the			play a noise bar on the TV screen and the picture
OPEN/CLOSE button.			may revert to Black and White. This is normal.
			3)Press the PLAY button to return to normal speed.
TRACKING ADJUSTMENT
			STILL PICTURE
		TV/VCR
• Tracking adjustment will be set automatically				TV/VCR
			You can view a still picture on the TV screen during playback
(Digital Tracking function) when you start play-
			(the Still mode). Press the PAUSE button during playback.
back.
			Only tapes recorded in the SLP mode will show the least
• However when playing pre-recorded tapes or tapes
			amount of lines.Press the PLAY button to return to playback.
recorded on units other than your own, noise lines			NOTES:
(black and white streaks) may appear on the play-
			• You can advance the picture one frame at a time by
back picture. If this occurs, you can adjust the
			pressing the PAUSE button during the Still mode.
tracking control manually by pressing the CHAN-
			• If it is left in the Pause mode for more than five
NEL button K or L until the streaks disappear. To			minutes, the TV/DVD/VCR will automatically
return to the DTR function, stop the tape once and			switch to the Stop mode.
start playback again.
			VERTICAL HOLD CONTROL
• You can reduce the noise lines by pressing the
CHANNEL button K or L in slow mode, too.
				TV/VCR
Tracking adjustment in Slow mode will not be set
			In the Pause/Still mode only, when the picture begins
automatically.
			to vibrate vertically, stabilize the picture by pressing
			the CHANNEL button K or L.
			NOTE:
			If there are video noise lines on the screen, see Tracking
			Adjustment section.
	- 26 -				EN

1C29