Emerson EWC20D5 A owner manual Special Playback Function, Repeatprogram, Random Playback

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

To activate the repeat function, hit [REPEAT] during playback.

¡The repeat mode changes as described below every time you hit the button.

¡Repeat Title/Chapter is not available with some scenes.

¡The REPEAT setting will be cleared when moving to other title or chapter.

REPEAT TRACK

CD

To activate the repeat function, hit [REPEAT] during playback.

¡The repeat mode changes as described below every time you hit the button.

¡Repeat setting will be cleared when moving to other track.

¡Repeat playback does not function during repeat A- B playback.

REPEAT A-B

DVD-V CD

1Hit [REPEAT A-B] at your chosen starting point.

¡“ A-” appears briefly on the TV screen.

2Hit [REPEAT A-B] again at your chosen end point.

¡“ A-B” appears briefly on the TV screen, and the repeat sequence begins.

3To exit the sequence, hit [REPEAT A-B].

NOTES:

¡The repeat A-B section can only be set within the current title (for DVDs) or current track (for Audio CDs).

¡Repeat A-B is not available with some scenes in DVD. ¡To cancel the A point which was set, hit [CLEAR]. ¡Repeat A-B playback does not function during title,

chapter, track or all repeat playback.

CD

You may determine the order in which tracks will play.

1In stop mode, hit [MODE].

¡The PROGRAM screen will appear.

2Press [▲ / ▼] to select a track, then hit

3Repeat step 2 until you have selected all the tracks you want to play in the program.

4Hit [PLAY O] to play the programmed tracks.

NOTES:

¡While the program is being played back, the STOP works as follows.

¡Hit [STOP C] once and then [PLAY O] again, playback will restart from the point where STOP was pressed. (Program continued)

¡Hit [STOP C] twice and then [PLAY O] again, playback will restart from the track in the usual way. (Program canceled)

¡Up to 99 programs can be entered.

¡To erase all tracks in the program at once, select “ALL CLEAR” at the bottom of the list at step 2.

¡If you like to repeat the current track in the program, hit [REPEAT] repeatedly until “ TRACK”

appears during playback. If you like to repeat the entire program hit [REPEAT] repeatedly until “ ALL” appears during playback.

RANDOM PLAYBACK

CD

This shuffles the playing order of tracks instead of playback in the sequence.

1In stop mode, hit [MODE] twice.

¡RANDOM screen appears.

RANDOM

RANDOM PROGRAM

- - no indication - -

PLAY

2Hit [PLAY O] to start random playback.

NOTE:

¡If you like to repeat the current track in the random selection, hit [REPEAT] repeatedly until “ TRACK” appears during playback. If you like to

repeat the entire random selection hit [REPEAT] repeatedly until “ ALL” appears during playback.

EN