Grundig Scenos UMS 4400 DVD manual Setting and storing radio stations

SETTINGS ____________________________________________________________________________________

FM 87.50 MHz

FM 100.60 MHz

FM 98.75 MHz

o1

FM 100.60 MHz

1

FM 100.60 MHz

Setting and storing radio stations

Up to 20 radio stations in the FM range and up to 10 stations in the AM range can be stored. You can see the displays for this on the DVD Micro system.

1 Press »ON/OFF ECO ￿« to switch on the DVD Micro System from standby mode.

– The DVD Micro System switches on with the last input source selected.

2Use »FM TUNER AM« on the DVD Micro System or »TV AM/FM« on the remote control to select TUNER as the input source.

–Display: e.g. »FM 87.50 MHz«.

3Press »FM TUNER AM« on the DVD Micro System or »TV AM/FM« on the remote control to select the desired frequency band (FM or AM).

4To start the search, press » TUNING 3« or » TUNING 4« on the remote control and keep them pressed down until the frequency changes to search mode.

–The search stops when a station is found.

–Display: »SEARCH«, then »SEARCHING« in ticker text display, then »FM 100.60 MHz« for example.

Note:

To switch through frequencies step-by-step press » TUNING 3« or

»TUNING 4« on the remote control briefly repeatedly.

– Display: the frequency in steps of 50 kHz.

5 Select the storage function by pressing »PROGRAM« on the remote control.

– Display: »01« for the preset position flashes.

Note:

If no button is pressed within 5 seconds, the DVD Micro System automatically quits the storage function.

6Select the desired station position with the »DOWN PRESET UP« button.

Note:

you can enter the station position directly using the number buttons »1... 0« on the remote control.

7Store radio stations by pressing »PROGRAM« on the remote control within five seconds.

–Display: briefly »STORED« as ticker text, then »1 FM 100. 60 MHz« for example.

24