Grundig Scenos UMS 4400 DVD manual Deleting a program

DISC-MODE_________________________________________________________________________________

PROG

P01 T00

PROG

P02 T03

Creating a track memory – playing back tracks in selected order

You can store and then play back up to 99 tracks in a particular order from the inserted disc. A track may be stored more than once. The DVD Micro System must be in the stop position.

This function is not available for DVDs.

1Select this function with »PROGRAM« on the remote control.

–Display on the DVD Micro System: » P01 T00« and » PROG«. » 00« flashes.

2 Select the desired two-digit track number with the numerical buttons » 1 ... 0« (e.g. » 06« or » 12«) and confirm with »DEMO/OK«.

– Display: e.g. » P01 « (memory position) and » 03 « (for the first track).

Note:

To programme further tracks, repeat step 2.

3To start playback of the memory, press »PLAY/PAUSE ￿ II«.

–Playback begins with the first programmed track.

4To end playback of the memory press »STOP 7«.

–This memory is stored.

Deleting a program

The memory is deleted if:

–When the system is stopped »PROGRAM« is held down (on-screen display »PROGRAM OFF«);

–The disc compartment is opened

–The DVD Micro System is switched to standby with »ON/OFF«.

36