Jensen JE1907DC operation manual Watching TV, Introducing Channel Number Selecting Channels

Watching TV

Introducing Channel Number

Selecting Channels

This television is capable of receiving the full range of cable-TV channels available today, from the most digital and HDTV channels, to the traditional analog channels.

As the transition toward full digital TV continues, some cable-TV systems in the USA will have a mixture of analog and digital channels in their lineups. So in most situations the ATSC PSIP channel number is composed of a major channel number and a minor channel number. The major channel number is same for both analog and digital channels (It is equal to the NTSC channel number for existing broadcasters). An analog channel usually has a minor channel number of zero, while a digital channel usually has a minor channel number of 1, 2 or larger.

You can select analog channels in several ways.

Method 1 - Using CH+/CH- on the remote control

or CH▲/CH▼on the TV
		+
Press the CH+/CH- or CH▲/CH▼ to cycle among all		CH
available channels. Only those channels marked with a tick
symbol can be selected by the CH+/CH- or CH▲/CH▼
button.
Method 2 - Using RECALL on the remote control	RECALL
Press RECALL to switch to the previously tuned channel.
Press RECALL again to switch back to the currently tuned
channel.

Method 3 - Using 0-9, dash(-) and OK on the remote control

For analog TV channels

Press the 0-9number buttons to input a channel number and confirm with OK to select up to 125 channels for VHF/UHF/CATV.

For digital TV channel

Press the 0-9number buttons and dash(-)to input a digital channel number, the TV goes to the selected channel directly.

(e. g., channel 8-3, just press 8, - and 3 one by one)

1	2	3	4
5	6	7	8
9	0
1	2	3	4
5	6	7	8
9	0

If you enter channel number with 0-9 only (without

pressing OK), channel selection will be made if T/F there is no operation for a few seconds.

Method 4 - Using master channel list

Press the LIST button to display the master channel list, you	LIST
	SETUP
may select channel with the ▲▼and OK buttons.
Method 5 - Using favorite channel list
Press the FAVORITE button to display a desired favorite	FAVORITE
	EQ
channel list, you may select channel with the ▲▼and OK
buttons.

24