Dolby Laboratories DV2418, DV2018 owner manual Reception Disturbances, Ignition

Page 59

Reception Disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local cable company broadcast.

IGNITION:

Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances.

GHOSTS:

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or other objects. Changing the direction or position of the antenna may improve the reception.

SNOW:

If your receiver is located in the fringe area of a television station where the signal is weak, your picture may be marred by the appearance of small dots. When the signal is extremely weak, it maybe necessary to install an external antenna to improve the picture.

RADIO FREQUENCY INTERFERENCE:

This interference produces moving ripples or diagonal streaks, and in some cases, causes loss of contrast in the picture.

PICTURE SIZE VARIATION:

A slight picture size variation is quite normal when you adjust the

CONTRAST or BRIGHTNESS setting.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. Mild soap and a soft, damp cloth may be used.

57

Image 59
Contents DV2018 DV2418 Table of Contents Important Safety Instructions Grounding system of the building, as NEC that provides guidelines forProper grounding and, in particular, specifies That the cable ground shall be connected toDisc tray Getting StartedFront DV2418 BackDV2018 Menu VOL + Remote ControlOperation of the remote may be unstable Effective range of the RemoteSeparate VHF/UHF Antennas InstallationAntenna connections Cable CATV/satellite connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service or Satellite Rear of TV/DVD Using an Audio AmplifierUsing an AV Amplifier with built-in digital surround Connecting AV2 inputs Connecting AV1 inputsTV set can turn off automatically by Power on/offSelecting the Video Input Switching from AV to TVSearch started TuningVOL Menu Fine tuningAUTO, NTSC358 and NTSC443 Tuning Setting the Color SystemPress VOL+ or VOL- to select a proper color system Use the /ZOOM button Channel SelectionUse 0~9 digit buttons and the --/---/+10 button Use the CH+ or CH- buttonVOL VOL+ Adjusting PictureModel DV2018 does not have the SVM function Setting Blue background optionPress VOL+ or VOL- button to select On or Off To enter the Sound menu SoundUse the VOL+ or VOL- button Use the Mute buttonBalance Adjusted settings are stored in Personal modeOr Off Treble MinusOFF 120 Min Min Min Min TimerSetting Sleep timer Before setting the Off Time or On Time, first set the clockIncrease/decrease by Press CHPress VOL+ or VOL- to set On time. Press and hold toTo enter the SET UP menu System SetupMono Stereo SAP If the audio is Selecting audio modeRecalling On-screen display Active Input a password for the Child lock menuChanging password Parental ControlMovie Ratings To enter V-chip menuMpaa Rating SET-UP Or unblock will appearTV-14 TV Rating SET-UPFrom the V-chip submenu, press CH+ or CH- repeatedly to select TVCanadian English Rating SET-UP Canadian French Rating SET-UP DVD Operation Guide Disc Information Basic Playback Slow motion Playback Quickly select Chapter or TrackFast Forward Playback Skipping chapters or tracks forward Reverse Playback Skipping chapters or tracks reverseUsing a PBC menu VCD Using On-screen MenuUsing a Title Menu DVD Using a DVD menu DVDLocating desired point Audio CD/VCD Locating Desired SceneLocating desired scene DVD VCD Displaying Status of DiscDVD Repeat playback Setting soundtrack languageSpecial Functions ZoomingSubtitle repeatedly until Subtitle OFF appears Changing Angles DVDChanging Subtitle languages DVD If you want to turn off the subtitle, pressGeneral Setup Initial SettingsSetting Last Memory General Setup Setting OSD LanguageSetting the Caption feature Setting Screen SaverSpdif Setup Audio SetupAccessing Audio Setup Speaker SetupVideo Setup Setting Subtitle Language Video Setup Setting Luma Delay itemPreference Setup Accessing Preference SetupLoading Default setttings Preference Setup Setting Parental lock levelSetting 6-digit Password Playback Operations Playing Back MP3 discPlay Mode selection Supported formats Playing Back Kodak Picture CDBrowsing pictures Setting picture transition effectsZooming picture Rotating/Mirroring pictureDo not exceed 5 seconds between each step Setting the Universal Remote Control UnitTV codes DVD/VCD/HIFI codes CABLE/SATELLITE codes VCR codes Magnin TV broadcast reception Troubleshooting GuidePower Remote ControlSymptom Possible Solutions DVD Ignition Reception DisturbancesDVD/VCD/CD player SpecificationsAccessories Television