Dolby Laboratories DV2418, DV2018 owner manual Setting the Universal Remote Control Unit

Page 51

Setting the Universal Remote Control Unit

Your Universal Remote Control has been preprogrammed to operate your TV (just press the TV button). You may also program the Universal Remote Control to operate other devices.

1. HOW TO SET THE UNIT

Locate the correct code for the Brand/Model of the device you wish to control from the attached code list.

1 Press and hold the SET key and then press the key that corresponds to the device you wish to control (TV, VCR, Cable/SAT, or DVD/VCD/HIFI).

2 Enter one of the 3-digit code for your Brand/Model from the list.

3 The LED indicator will blink twice.

If the correct code has been entered, all the functions of the device you wish to control should operate. Some of the codes will control most but not all of the functions of your device. If this occurs, repeat the above 3 steps using another 3 digit code from the code list that corresponds to your Brand/Model.

Note:

Do not exceed 5 seconds between each step.

2.HOW TO DETERMINE A 3-DIGIT CODE

1Hold SET and press 1 simultaneously then release. The number of times LED indicator represents the number of the 1st digit.

2Hold SET and press 2 simultaneously then release. The number of times LED indicator represents the number of the 2nd digit.

3Hold SET and press 3 simultaneously then release. The number of times LED indicator represents the number of the 3rd digit.

3.HOW TO USE “QUICK SEARCH”

If you can not locate the appropriate code for your Brand/Model, you can try “Quick Search”.

1

Turn the device you wish to control ON.

2

Locate the button on the Universal Remote Control for the device you want to operate (TV, VCR, Cable/SAT, or

 

DVD/VCD/HIFI). Press this key for 3 seconds, then release. The “Quick Search” mode is on when the LED

3

indicator blinks.

When the device you wish to control shuts off, immediately press the SET key and release.

If the correct code has been found, all the functions of the device you wish to control should operate. If not, repeat the above steps 1 -3.

4. HOW TO SWITCH OVER TO DIFFERENT DEVICE

Your Universal Remote Control is already programmed to operate your TV (just press the TV button). If you have programmed the Universal Remote Control to operate other devices, you must press the key that corresponds to the device you wish to control (TV, VCR, Cable/SAT, or DVD/VCD/HIFI).

5. CODE LIST ON SETUP MODE OR QUICK SEARCH MODE

DEVICE NAME

FOR DEVICE

TOTAL CODES

ACTIVE DEVICE CODE

TV

TV/CTV/TXT

304

001-304

 

 

 

 

VCR

VCR

384

001-384

CAB/SAT

CABEL/SATELLITE

270

001-270

 

 

 

 

DVD/VCD/HIFI

DVD/VCD/HIFI

292

001-292

 

 

 

 

6. MEMO OF BRAND & MODEL

DEVICE

BRAND

MODEL

CODE

TV

VCR

CAB/SAT

DVD/VCD/HIFI

49

Page 50 Page 52
Image 51
Page 50 Page 52
Contents DV2018 DV2418 Table of Contents Important Safety Instructions Grounding system of the building, as NEC that provides guidelines forProper grounding and, in particular, specifies That the cable ground shall be connected toGetting Started FrontDisc tray Back DV2018DV2418 Menu VOL + Remote ControlOperation of the remote may be unstable Effective range of the RemoteInstallation Antenna connectionsSeparate VHF/UHF Antennas For Subscribers to Basic Cable TV Service For Subscribers to Scrambled Cable TV Service or SatelliteCable CATV/satellite connections Using an Audio Amplifier Using an AV Amplifier with built-in digital surroundRear of TV/DVD Connecting AV2 inputs Connecting AV1 inputsTV set can turn off automatically by Power on/offSelecting the Video Input Switching from AV to TVSearch started TuningVOL Menu Fine tuningTuning Setting the Color System Press VOL+ or VOL- to select a proper color systemAUTO, NTSC358 and NTSC443 Use the /ZOOM button Channel SelectionUse 0~9 digit buttons and the --/---/+10 button Use the CH+ or CH- buttonVOL VOL+ Adjusting PictureSetting Blue background option Press VOL+ or VOL- button to select On or OffModel DV2018 does not have the SVM function To enter the Sound menu SoundUse the VOL+ or VOL- button Use the Mute buttonBalance Adjusted settings are stored in Personal modeOr Off Treble MinusOFF 120 Min Min Min Min TimerSetting Sleep timer Before setting the Off Time or On Time, first set the clockIncrease/decrease by Press CHPress VOL+ or VOL- to set On time. Press and hold toTo enter the SET UP menu System SetupSelecting audio mode Recalling On-screen displayMono Stereo SAP If the audio is Active Input a password for the Child lock menuChanging password Parental ControlMovie Ratings To enter V-chip menuMpaa Rating SET-UP Or unblock will appearTV-14 TV Rating SET-UPFrom the V-chip submenu, press CH+ or CH- repeatedly to select TVCanadian English Rating SET-UP Canadian French Rating SET-UP DVD Operation Guide Disc Information Basic Playback Slow motion Playback Quickly select Chapter or TrackFast Forward Playback Skipping chapters or tracks forward Reverse Playback Skipping chapters or tracks reverseUsing a PBC menu VCD Using On-screen MenuUsing a Title Menu DVD Using a DVD menu DVDLocating Desired Scene Locating desired scene DVDLocating desired point Audio CD/VCD Displaying Status of Disc DVDVCD Repeat playback Setting soundtrack languageSpecial Functions ZoomingSubtitle repeatedly until Subtitle OFF appears Changing Angles DVDChanging Subtitle languages DVD If you want to turn off the subtitle, pressGeneral Setup Initial SettingsSetting Last Memory General Setup Setting OSD LanguageSetting the Caption feature Setting Screen SaverSpdif Setup Audio SetupAccessing Audio Setup Speaker SetupVideo Setup Setting Subtitle Language Video Setup Setting Luma Delay itemPreference Setup Accessing Preference SetupPreference Setup Setting Parental lock level Setting 6-digit PasswordLoading Default setttings Playback Operations Playing Back MP3 discPlay Mode selection Supported formats Playing Back Kodak Picture CDBrowsing pictures Setting picture transition effectsZooming picture Rotating/Mirroring pictureDo not exceed 5 seconds between each step Setting the Universal Remote Control UnitTV codes DVD/VCD/HIFI codes CABLE/SATELLITE codes VCR codes Magnin TV broadcast reception Troubleshooting GuidePower Remote ControlSymptom Possible Solutions DVD Ignition Reception DisturbancesDVD/VCD/CD player SpecificationsAccessories Television
Top Page Image Contents