Panasonic DMP-BDT310 Connecting to an AC power source, Settings, Easy Setting, Preparation

STEP 4 : Connecting to an AC power source

	R
COMMUNICATION	AUDI
CAMERA

AC power supply cord

(supplied)

To a household AC outlet

[For_units_with_PX_printed_on_the_outer_packaging]

If the power plug does not fit

your AC outlet, use the power plug adaptor (supplied). If it still doesn’t fit, contact an

electrical parts distributor for assistance.

≥ This unit consumes a small amount of AC power ( 39) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.

STEP 5 : Settings

Easy Setting

After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í POWER].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit.

2 Follow the on-screen instructions and make the settings with [3, 4] and press [OK].

After completing “Easy Setting”, you can perform “Network Easy Setting”.

≥You can perform this setup anytime by selecting “Easy Setting” in the

Setup menu. ( 33)

Touch Free Sensor [BDT310] [BDT215] [BDT210]

By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close the tray just by waving your hand over the TOUCH-FREE SENSOR on the upper side of the unit. (This will also work when in stand-by.)

≥Be aware that the TOUCH-FREE SENSOR may function unintentionally in the following cases:

–When your hand or arm, an object, a small child, or a small animal comes close to the upper part of the unit

–When an object is placed on top of the unit and vibration is applied

–When connecting a cable etc. to the rear of the unit

≥Reactive distance of the sensor is automatically set in accordance with the installation conditions at the time of power supply connection and when the open/close button is pressed. To prevent an incorrect setting, do not place your hands or objects above the unit at these times.

≥Depending on the usage conditions, the TOUCH-FREE SENSOR may stop working or the reactive distance may become shorter. In such cases, press the tray open/close button once.

12 VQT3B58