Connections & Settings
15
VQT3B58
≥Refer to the operating instructions of the hub or router.
≥WPS (Wi-Fi Protected Setup) is a standard that facilitates settings
relating to the connection and security of wireless LAN devices. To see
whether your Wireless router supports WPS, check the Wireless router
operating instructions.
≥You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (32)
≥You can redo these settings individually using “Network Settings”.
(32)
≥Do not use this unit or Wireless LAN adaptor to connect to any wireless
network for which you do not have usage rights.
During automatic searches in a wireless network environment,
wireless networks (SSID*) for which you do not have usage rights
may be displayed; however, using these networks may be regarded
as illegal access.
≥After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router might change. When you have trouble
getting online on your PC, perform the network settings on your PC in
accordance with the settings of Wireless router.
≥Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by
a third party, or the leaking of data such as personal or secret
information.
*An SSID (Service Set IDentification) is a name used by wireless LAN
to identify a particular network. Transmission is possible if the SSID
matches for both devices.
If you have more than one Panasonic player/recorder and
the remote control o perates both products at once, you will
need to change the remote cont rol cod e on one product to
prevent this occurrence. (33, “Re mote Control Code”)
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a fea ture
operates. These updates ar e available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version i s available, the following
message is displayed.
To update the firmw are
Press [HOME] select “Setup” select “Player
Settings” select “Others” [OK] select “Firmware
Update” [OK] select “Update Now”
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “F INISH” will be displayed on
the unit’s display. Unit will r estart and the following screen
will be displayed.
≥If downloading on this un it fails or this unit is no t connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (33,“System
Information”)
≥Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
≥If you do not want to check for the latest firmware version, set
“Automatic Update Check” to “Off”. (33)
Reprogramming the remote controlFirmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.
Current Version:
x.xx
RETURN
OK
DMP-BDT110_210_VQT3B58_eng.book 15 ページ ２０１１年５月１７日　火曜日　午後４時４３分