Panasonic DMP-BDT310, DMP-BDT215 owner manual When you experience problems with settings

When you experience problems with settings

Wireless Settings

Wireless Settings

Failed to complete.

A conflict with another device occurred.

Do you want to configure wireless network connection setting again ?

Yes	No
OK

Display	Check the following
A conflict with another	≥ Please wait a few moments,
device occurred.	and then try again.
	≥ Setting of the Wireless router
A time out error	for MAC Address etc.
	≥ The signal may be weak.
occurred.
	[BDT110] : Using the USB
	extension cable supplied with
	the Wireless LAN Adaptor,
	adjust the position of the
An authentication error	Wireless LAN Adaptor.
	≥ The SSID ( 15) and the
or a time out error	encryption key of the Wireless
occurred.	router.
	≥ Please wait a few moments,
	and then try again.
	≥ [BDT110] : Connection of
	Wireless LAN Adaptor
A device error occurred.	≥ Contact our Customer
	Service Center or your
	nearest dealer.

Network Easy Setting

(Home Network Connection Check)

Network Easy Setting (Home Network Connection Check)

Complete.
1.	LAN cable connection	: Fail
2.	IP address setting	: Fail
3.	Connection to gateway	: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.

	Yes	No
	OK
	Display		Check the
			following
1.	LAN cable connection or	: Fail	≥ Connection of
Wireless setting			the LAN
2.	IP address setting	: Fail	cables ( 10)
3.	Connection to gateway	: Fail
1.	LAN cable connection or	: Pass	≥ Connection
Wireless setting			and settings
2.	IP address setting	: Fail	of the hub
3.	Connection to gateway	: Fail	and router
			≥ Settings of
1.	LAN cable connection or
		: Pass	“IP Address/
Wireless setting
			DNS
		: Pass or
			Settings”
2.	IP address setting	Home	( 32)
		network
		available
3.	Connection to gateway	: Fail

Network Easy Setting (Internet Connection Check)

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the owner's manual for the cause of the error and the solution for it.

Press [OK].

OK

Display	Check the following
Cannot find the	≥ “Primary DNS” and “Secondary
server.	DNS” settings of “IP Address/
(Error code: B019)	DNS Settings” ( 32)
	≥ The server may be busy or the
Failed to connect to	service may have been
	suspended. Please wait a few
the server.
	moments, and then try again.
(Error code: B020)
	≥ Settings of “Proxy Server
	Settings” ( 32) and the router

14 VQT3B58