Panasonic DMP-BDT215, DMP-BDT310 owner manual Specifications, File format, Audio information

Specifications

Signal system:		NTSC
Operating temperature range:
	i5 oC to i35 oC (i41 oF to i95 oF)
Operating humidity range:
	10 % to 80 % RH (no condensation)
Video output:	1.0 Vp-p (75 ≠)/Pin jack:1 system
Audio output:		2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :		2 channel:1 system
Digital audio output:
HDMI AV output:	Optical digital output (Optical terminal)
	Type A (19 pin) [BDT310] : 2 system
	[BDT215] [BDT210] [BDT110] : 1 system
This unit supports “HDAVI Control 5” function.
SD card slot:		Connector : 1 system
USB slot:		USB2.0 : 2 system
Ethernet:	10BASE-T/100BASE-TX : 1 system

WLAN [BDT310] [BDT215] [BDT210]

Standard Compliance:

IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b

Transmission system: OFDM system, DSSS system

Access Mode:	Infrastructure mode
Security:	WPA2-PSK (TKIP/AES)
	WPA-PSK (TKIP/AES)
	WEP (64 bit / 128 bit)

(This unit supports WPA and WPA2 encryption.)

LASER Specification

Class I LASER Product:

Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs) Laser power:No hazardous radiation is emitted with the

[For_U.S.A._and_Canada]	safety protection
Power supply:	AC 120 V, 60 Hz
Power consumption:	[BDT310] Approx. 13 W

[BDT215] [BDT210] [BDT110] Approx. 9.9 W

Power consumption in standby mode: Approx. 0.1 W Power consumption in quick start standby mode:

[BDT310] Approx. 4.1 W [BDT215] [BDT210] [BDT110] Approx. 3.2 W

[For_units_with_PX_printed_on_the_outer_packaging]

Power supply: AC 110 V to 240 V, 50 Hz/60 Hz

Power consumption:Approx. 13 W

Power consumption in standby mode: Approx. 0.2 W Power consumption in quick start standby mode:

Approx. 3.5 W

Dimensions (WkDkH) Including the projecting parts:

	430 mmk185 mmk35 mm
Mass (Weight):	(Approx. 16 15/16zk7 5/16zk1 7/16z)
	Approx. 1.6 kg (3.52 lbs)

Specifications are subject to change without notice.

File format

File format	Extension	Reference
MP3	“.MP3”, “.mp3”	ID3 tags (Only titles and
		the names of artists)
		≥ MOTION JPEG and
		Progressive JPEG is
		not supported
JPEG		≥ You may not be able to
	“.JPG”, “.jpg”	play back the file if you
		have edited the folder
		structure or the file
		name on a PC or other
		device.
	“.DIVX”, “.divx”,	≥ The video file and
	“.AVI”, “.avi”	subtitles text file are
		inside the same folder,
DivX	Subtitles text
		and the file names are
[BDT310/210_for_Canada]	file	the same except for
	“.SRT”, “.srt”,	the file extensions.
	“.SUB”, “.sub”,
		≥ Some DivX and MKV
	“.TXT”, “.txt”	file may not be played
	“.MKV”, “.mkv”	back, depending on the
		video resolution and
	Subtitles text
		frame rate condition.
MKV	file
	“.SRT”, “.srt”,
	“.SSA”, “.ssa”,
	“.ASS”, “.ass”

≥With certain recording states and folder structures, the play order may differ or playback may not be possible.

Audio information

The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. ( 30, Digital Audio Output)

≥The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format.

	Terminal	“Digital Audio Output”
		“Bitstream”	“PCM”
	HDMI AV	Outputs using original	BD-Video :
			7.1ch PCM*1*2*3
	OUT	audio*1	DVD-Video :
			5.1ch PCM
	OPTICAL	Dolby Digital/	Down-mixed 2ch
		DTS Digital Surround	PCM
*1	When “BD-Video Secondary Audio” is set to “On”, the audio will be
	output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.
*2	[BDT110] : The maximum possible number of Dolby sound is 5.1ch
	PCM.
*3	The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on			Reference
	the DTS, Inc. specifications.

VQT3B58 39