15-1917.fm Page 30 Monday, July 19, 1999 12:25 PM
Note: Punch-through does not work if the last two devices you select have the same (or similar) fea- tures. For example, if your TV and cable convert- er both have POWER keys on their remote controls, you must press the desired device key before you use the Phone Up 4’s PWR key.
Turning Punch-Through On and Off
If your cable converter or VCR does have a vol- ume control, you can turn off punch-through to let the Phone Up 4 control the volume of those devic- es.
Follow these steps to turn off punch-through.
1.Press the device key (CBL or VCR) for the device you want to use to control the volume. Then press and hold SETUP until the red light blinks twice.
2.Press 9 9 3. The red light blinks twice again.
3.Press VOL ^. The red light blinks twice to indicate punch-through is turned off.
To turn on punch-through, press and hold SETUP until the red light blinks twice, then press 9 9 3. The red light blinks twice. The press TV. The red light blinks twice to indicate punch-through is on.
USING THE SLEEP TIMER
Pressing SLEEP turns on the Phone Up 4’s built- in sleep timer or the built-in sleep timer (if one ex- ists) on the device you are using (TV, cable box, or satellite).
Note: If the selected device has its own sleep tim- er, the Phone Up 4’s sleep timer is disabled. See your device’s Owner’s Manual to operate its sleep timer.
Need help? Call 1-800-950-7044
30
