Watching TV Program, Picture Control Functions

Specification and Format

then press 3/4to set the found to be exchanged to.

Prog. Exchange

Current Channel	10
To Channe	20
Exchange	OK

Sound Tuning

DAfter adjusting the current channel and the found to be exchanged to, press 5/6to move the cursor to the Exchange option, and then press OK to start exchange and exchange the program on current channel to the channel you set for exchange.

Watching TV Program

You can watch TV program in a presetting channel.

How to select the desired program

AUsing Program number buttons

Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digital or three-figure, press continuously the numeric buttons in three second.

BUsing CH ∧ /CH ∨ buttons

Press CH∧ to select a channel number in number increasing direction. Press CH ∨ to select a channel number in number decreasing direction.

How to select the desired sound

Press VOL-/+buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

Mute Setting

APress MUTE button on the remote control and a icon will display on the screen. At this time, the sound of the TV set is turned off.

BIf you want to recover the sound, press MUTE button again or directly press VOL+ button.

Quick program view

ASuppose that you previously watched a TV program on Channel 8, but now you are watching a TV program on Channel 18 (as shown in the below figure).

BIf you want to return to Channel 8, just press "RECALL (Flashback)" once.

CIf you want to return to Channel 18 again, just press "RECALL (Flashback)" once again.

Note

RR This function is only available in TV mode.

Picture Control Functions

This means the adjustment of specific contents in the picture, if already in normal condition, it is not necessary to make any adjustment.

Due to different TV signal inputs, some items may need to be adjusted. The following makes a description by only taking TV signal as an example.

How to select the picture mode

APress MENU to display main menu on the screen, and

then press 3/4to select the Picture menu, afterwards press 5/6to enter the option to be adjusted.

BPress 5/6to move the cursor to the option to be adjusted, and then press 3/4to select Standard/ Vivid/Soft/User.

You can also press P.MODE on the remote control to

LED -LCD television Owner’s Manual 15