Specification and Format
Switching ON/OFF the TV set
AFirst, connect power cord correctly and the power indicator will light.
BPress POWER on the remote control again.
CIf you want to exchange to standing by status, please press down POWER on the remote control
DDisconnect the power supply or unplug the television if it is intended to completely cease the television performance.
Choose the Menu Language
When you satisfied with your set for the first time, you must select the language which will be used for displaying menus and indications.
APress MENU and 3/4to select Function menu.
BPress 5/6button to select Function menu.
CSelect a particular language by pressingrepeatedly.
DWhen you satisfied with your choice, press MENU to return to normal viewing.
Choose the Input source
If the TV is not in TV mode, press SOURCE on the remote control unit, and signal source menu will be displayed on the TV screen (as shown in the below figure). Press 5/6to select the TV option, and pressor OK
to confirm the switching to TV input terminal. After switching, the signal source menu disappears, and at the upper right corner of screen displays the information of current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu will automatically disappear upon reaching the OSD disappearance time preset in the main menu.
SOURCE
TV
AV
Component
USB
PC
HDMI
MOVE OK
OK
Searching Channel
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Channel Edit
APress MENU on the remote control unit or MENU on the TV’s front panel to display main menu, and then press 3/4to select Tuning menu.
BPress 5/6to select the Channel Edit option, and then press OK to enter submenu.
LED