Remote Control
Remote Control
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark)
3.Replace the cover of the battery compartment.
Precautions
As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
|
|
Make sure that two AAA alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.
Make sure that there is no obstacle between the remote controller and television set.
LED