How to choose audio mode

Troubleshing and Specification

select Standard/Vivid/Soft/ User mode.

❖❖ Standard

The picture brightness and hue are moderate.

❖❖ Vivid

The picture is vivid, bright and dynamic.

❖❖ Soft

The picture is soft and in light color.

❖❖ User

The picture effect is set by yourself to your preference.

How to customize your own picture status

APress MENU to display main menu on the screen,

and then press 3/4to select the Picture menu, afterwards press 5/6to enter the option to be adjusted.

BPress 5/6to move the cursor to the option to be adjusted, and then press 3/4to adjust it to your desired effect.

menu
Contrast			50

Brightness			50

Color			50

Sharpness			50

Tint			0

Picture Mode		Standard
Aspect Ratio		Full Screen
Palette	OK Standard
Reset	OK

Sound

Tuning

❖❖ Contrast

This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.

❖❖ Brightness

This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture.

❖❖ Color

This will adjust the saturation level of the colors to suit your personal preference.

❖❖ Aspect Ratio

Select the mode of Aspect Ratio(Full screen/4:3/ Zoom/Cinema/Panorama).

❖❖ Palette:

Press 5/6to select the Palette option, and then press 4to enter its submenu, and finally press

5/6to select a toner pattern from six patterns (User, Standard, 6500K, 7300K, 8500K and 9300K) to your color preference. Normally, the Standard mode is selected.

If the User mode is selected, press 3/4to enter the palette menu, (as shown in the below figure), and then press 3/4to select a benchmark in the range of 2500K~15000K from warm color to cold color, afterwards press 5/6to adjust; if a different benchmark is selected for adjustment, the original adjustment data will be automatically cleared.