PIP/POP Operation, Pip On/Off | Haier LCD-42K40A-HD, LCD-42K40-HD

BASIC OPERATION

PIP/POP OPERATION

Using PIP/POP function, you can enjoy a TV program and an image such as HDMI input from a side terminal at the same time.

Only the sound on the main picture is heard from the TV speaker or the headphone jack. The sound on the sub-picture cannot be heard.

Note:

REMOTE CONTROL

POP button

P-SWAP button

PIP button P-INPUT button

●PIP/POP function only work in "FULL" mode.

●PIP/POP will prohibited during 1080p mode, warning message "OUT OF RANGE" will be displayed.

●When PIP/POP is ON, MENU has restriction as follows:

-SEARCH can not be selected in CHANNEL menu.

-PICTURE menu for Sub picture is not available.

-PC screen menu for Sub picture can not be selected when Sub picture has PC source.

PIP ON/OFF

Confirm the each screen size (TV, AV1, AV2-S, DVD, HDMI or PC) is “FULL” mode. PIP can be set only in “Full” mode. For example, set the screen size of HDMI and TV to “Full” mode respectively when you combine picture of HDMI with the picture of TV.

1Press PIP button to display sub picture.

2Each time PIP button is pressed, the location of sub picture is changed as follows.

3During PIP mode, pressing the P-SWAP button will switch main and sub picture. The sound on the main picture and the sub picture also changes at the same time.

4Press P-INPUT button in PIP mode can switch input source in Sub picture. (Refer to this page "PIP Combination".)

5Press BACK or POWER ON/OFF buttons to exit PIP mode.

Sub Picture					Main Picture

(PIP OFF)

Switching of the Main picture and Sub picture

During PIP mode, pressing the P-SWAP button will switch main and sub picture. The sound on the main picture and the sub picture also changes at the same time.

Note:

24 PIP mode can be cancelled by BACK button except that On-Screen menu is being operated.

LCD-K40.indd 24

1/21/2010 10:47:20 AM