Channel Menu, Auto Search Menu | Haier LCD-32K40, LCD-42K40A-HD

MENU OPERATION (TV/AV/HDMI mode)

CHANNEL

1	Press MENU button and the main menu will appear. Whenever
	MAIN MENU is accessed initially, CHANNEL will be the default
2	selection.
2	Press POINT ▼ button to enter into CHANNEL menu.
3	Press POINT ▲▼ buttons to select the item desired.
4	Press POINT ◄► buttons to adjust the item.

■Press BACK button to return to the previous menu.

■Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.

Note:

●"CHANNEL" doesn't work in HDMI mode, AV3(DVD) mode and PC mode.

●"COLOUR SYSTEM" in "CHANNEL" menu is only active in TV, AV1 and AV2(S-VIDEO) mode.

●The settings for "SOUND SYSTEM", "COLOUR SYSTEM" or "SKIP" are automatically memorized in the programme position.

AUTO SEARCH

All receivable channels are automatically tuned in and memorized in consecutive programme position.

●The Automatic Tuning operation can be cancelled at any time by pressing BACK button or MENU button.

●After all receivable channels have been found and stored, the TV set will automatically return to programme position “1”.

SEMI-AUTO SEARCH

Use to preset a receivable channel in any desired programme position, e.g. the position with the same number as the channel.

1 Select channel “15”.

2 Enter into CHANNEL menu, press POINT ▲▼ buttons to select "SEMI-AUTO SEARCH". Press POINT ◄► buttons to enter into the SEMI-AUTO SEARCH menu.

3 Press POINT ▲▼ buttons to select "SEARCH". Press POINT ◄► buttons to start the channel searching.

4 Press POINT ► button and the tuning will go to the higher frequencies. Press POINT ◄ button and the tuning will go to the lower frequencies.

Use POINT ◄ or POINT ► button to search for required TV station. Once a station is located, searching will automatically stop. Continue till desired channel is located.