MENU OPERATION (PC mode)
SETUP
1 | Press MENU button and the main menu will appear. |
| Press POINT ◄► buttons to select SETUP. |
2 | Press POINT ▼ buttons to enter into SETUP menu. |
3 | Press POINT ▲▼ buttons to select the item desired. |
4 | Press POINT ◄► buttons to enter the item selected. |
■Press BACK button to return to the previous menu.
■Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
Note:
For the details, please refer to "SETUP" on pages
PC ADJUST
This function is used to adjust the position of image displayed on screen. It can be selected when the LCD TV could be received PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN" on page 47.)
Press POINT ◄► buttons to enter PC SCREEN menu. It can be select "AUTO ADJUST",
AUTO ADJUST
Press POINT ◄► buttons, and the TV automatically detects incoming signal, and adjust itself to optimize its performance. If the image is not displayed properly, a manual adjustment is required (Refer to following adjustments).
H-POSITION
The horizontal picture position will be moved to the left side by pressing POINT ◄ button. And it will be moved to the right side by pressing POINT ► button. (0~100)
The vertical picture position will be moved down side by pressing POINT ◄ button. And it will be moved up side by pressing POINT
►button. (0~100)
PHASE
Eliminate disorder from the image. Press POINT ◄► buttons to adjust PHASE. (0~100)
CLOCK
Eliminate flicker from the image. Press POINT ◄► buttons to adjust CLOCK. (0~100)
AUTO SHUT DOWN
Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF. When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds, TV will be automatically switched to Backlight off mode.
During Backlight Off Mode within 10 minutes, TV will be switched to On Mode if PC is switched On.
After Backlight Mode continues for 10 minutes, it will be switched to Standby Mode. During Standby mode, TV will not be switched to On mode even if PC is switched On.
To switch on TV, press Power button on Remote Control or TV.
Note:
This function is for PC mode (full screen) only. It is not applicable for PIP/POP dual pictures.
SETUP MENU
|
|
| SETUP |
CHILD LOCK | ON |
ECO | SENSOR |
DYNAMIC AI | ON |
ACTIVE CONTRAST | ON |
GAME MODE | OFF |
GAME INPUT SEL | HDMI1 |
HDMI LINK |
|
PC ADJUST |
|
SHOP MODE |
|
: SELECT 
: ADJUST 
: BACK 
: EXIT
| SETUP |
CHILD LOCK | ON |
ECO | SENSOR |
DYNAMIC AI | ON |
ACTIVE CONTRAST | ON |
GAME MODE | OFF |
GAME INPUT SEL | HDMI1 |
HDMI LINK |
|
PC ADJUST |
|
SHOP MODE |
|
: SELECT 
: ADJUST 
: BACK 
: EXIT
SETUP
PC ADJUST
AUTO ADJUST
H - POSITION
V - POSITION
PHASE
CLOCK
AUTO SHUT DOWN | ON |
: SELECT 
: ADJUST 
: BACK 
: EXIT
AUTO ADJUST
41
1/21/2010 10:47:30 AM