About your LED LCD TV
CONNECTING YOUR
TV
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal computer by connecting it with a VGA cable (not supplied).
ARead your computer user guide and check it has a VGA connector.
BTurn the power off on your TV and PC.
CConnect a D type
DTurn on the power of the TV firstly and then the PC.
EPress the button on the TV or TV remote control to set the video input mode to VGA.
FOnce the image shows, if there is noise present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.
CONNECT A DVD PLAYER TO YOUR TV
Connect the DVD video outputs (Y, Pb, Pr) to the COMPONENT (Y, Pb, Pr) IN socket on your TV.
ATurn on the DVD player and insert a DVD.
BPress the button to select .
CRefer to the DVD player user guide for operating instructions.
DVD
CONNECT A DVD PLAYER OR VCR TO YOUR TV
There are two ways in which you can connect a DVD player or VCR to your TV. Make sure that both the TV and DVD player or VCR are switched off before you connect them.
Connection Option 1
AConnect the audio and
BInsert a video tape into the VCR and press PLAY on the VCR.
CTurn on the power of the TV first, then the VCR.
DPress the SOURCE button on the TV to set the video input mode to
Connection Option 2
AConnect the AV DVD/VCR outputs to the AV IN socket on your TV.
BPress the SOURCE button on the TV to set the video input mode to AV.
SCART INPUT
AConnect the scart lead from the external device (DVD player,
Digital LED LCD Television Instruction Manual