About your LCD / LED LCD TV / Getting Started
BPress the SOURCE button to select SCART mode.
CPress the PLAY button on the external device.
HDMI INPUT
AConnect the cable from the HDMI device to the TV HDMI socket.
BPress the SOURCE button to select HDMI mode.
CRefer to the HDMI device user guide for how to operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall bracket (not supplied). Use M4/M6 machine screws (4 pcs) to screw the TV onto the bracket (not supplied).
PREPARATION OF
CClose the cover of the battery compartment.
BATTERY CAUTION
Confirm there is no object between the remote control and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the signal sent by the remote control. In this situation turn the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery types. Install the batteries at the correct polarities. Do not use rechargeable batteries. If your TV is to be stored for a period of time, remove the batteries from the remote control.
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
APlace the remote control face down, then open the cover of the battery compartment.
BInstall two AAA batteries. (The + and - symbol of the battery must match with the marks on the remote).
Getting Started
Setting up
LOCATION
You will need to place your TV near your plug socket (so the power cable can comfortably reach) and within reach of your aerial socket or extension lead.
CONNECTION
AInsert your TV aerial lead into the Antenna input at the side of the TV.