INSTALLATION (continued)
To Connect External Equipment (continued)
Enjoying Digital Stereo Sound (Digital Stereo)
Enjoy the dynamic sound of Digtal Stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).
Set “AUDIO OUT” to “SPDIF/ PCM” via the setup menu.
Enjoy DTS
DTS programming can deliver surround sound with five discrete full range channels plus a sixth channel for a subwoofer. You can enjoy your APEX unit with a DTS Digital Surround Sound System. All you need is to connect your unit to a DTS receiver with an external decoder.
How to setup the sound output:
From the SETUP MENU display, select General Setup by pressing
OK Use 
button, set “AUDIO OUTPUT” to “SPDIF/RAW”.
COAXIAL
To PCM/BITSTREAM
|
| Coaxial cable | |
|
| (Optional) | |
Connection |
| To digital | |
| audio input | ||
Example |
| ||
|
| ||
|
| Amplifier equipped | |
|
| with digital audio input | |
| To video |
| |
Front | input |
| |
| Front | ||
speaker |
| ||
| speaker | ||
(left) | TV | ||
(right) | |||
| |||
|
|
COAXIAL
To PCM/BITSTREAM (Optional)
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technol- ogy must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless oth- erwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
It is forbidden by law to copy, broadcast, show, play in public, or rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs wil be distorted.
Notes:
1Do not connect the PCM/BITSTREAM jack of the unit to the AC - 3 RF input of a Dolby Digital receiver,Instead, connect to the “ DIGITAL” or “COAXIAL” input of a Dolby Digital/DTS receiver or Processor. The input of the AV receiver is not compatible with the PCM/BITSTREAM jack and is primarily for Laserdiscs only.
2Connect the PCM/BITSTREAM jack of the unit to the “DIGITAL” or “COAXIAL” input of a DTS receiver or Processor.
3Refer to the manual of the connected Equipment.
4Adjust the volume of your receiver to a comfortable listening level to avoid any speaker damage.
13