Curtis LCDVD2234A manual Connections & Setup, Antenna Connection, External Equipment Connections

CONNECTIONS & SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

ANTENNA CONNECTION

■For optimum picture quality, adjust antenna direction.

■An antenna cable and converter are not supplied.

■In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown below.

■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

CONNECTIONS & SETUP

EXTERNAL EQUIPMENT CONNECTIONS

1. Connect the AV jacks between TV and external equipment. Match the jack colors

(Video = yellow, Audio Left = white, and Audio Right = red).

2.Select AV source with using the SOURCE/ button on the remote control.

3.Operate the corresponding external equipment. Refer to external equipment

operating guide.

Camcorder

PHILIPS

Video Game Set

AV

S-VIDEO CONNECTION

When connecting with a S-Video cable

1.Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.

2.Connect the audio outputs of the DVD to the Audio Input (L/R) jacks on the set.

3.Turn on the DVD player, insert a DVD

4.Select S-VIDEO source with using the SOURCE/ button on the remote control.

5.Refer to the DVD player's manual for operating instructions

DVD

16 17