INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
Universal remote code
This is the code for remote control of LCDVD2234A,if you want to change to a universal remote control, you can edit this code into your universal remote control.
Not include.
INSTALLATION
INSTALLING BATTERIES
(1)Open the battery compartment cover on the back side (2)Insert two 1.5V batteries of AAA type with correct polarity (3)Close the battery compartment cover on the back side
Notes on Using Batteries
The use of the wrong type of batteries may cause chemical leaks and/or explosion.
Please note the following:
Always ensure that the batteries are inserted with the positive and negative terminals in the correct direction as shown in the batteries compartment. Different types of batteries have different characteristics. Do not mix different types. Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and /or cause chemical leaks from the old batteries. When batteries fail to function, replace them immediately. Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out of the batteries, wipe it up immediately using a dry cloth.
Due to varying storage conditions, the battery life for the batteries included with your unit may be shortened.
If the remote control is not used for a long period of time, remove the batteries.
Notes on using the Remote control.
Do not strike or drop the remote.
Do not expose the remote control to liquids and do not place it in humid environment.
Do not install or place the remote control in direct sunlight. The heat may damage the remote control.
12 | 13 |