BASIC OPERATION
TURNING THE TV ON
If your TV will be turned on, you will be able to use its features.
Turing on the TV
First, connect power cord correctly. When the indicator
illuminates red is standby mode.
Press the POWER/ 
button on the remote control then the indicator illuminates orange, after the TV initialization finished,
the indicator turns to green. It means the TV is in power mode. When you press the POWER/ 
button on the remote
control once again, the
in standby mode.
If you intend to be away on vacation, disconnect the power plug from wall power outlet.
VOLUME ADJUSTMENT
1. Press the VOL +/VOL- button on the control panel or the
VOL +/VOL- button on the remote control to adjust the volume.
2.If you want to switch the sound off, press the MUTE/ 
button on the remote control.
3.You can cancel this function by pressing the MUTE/ 
button on the remote control.
EPG
10+
SOURCE
MTS CC
CH LIST
GOTO
TITLE AUDIO SUBTITLE ANGLE
D.SETUP D.MENU INTRO REPEAT
BASIC OPERATION
SLEEP TIMER
You don't have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set to standby after the preset time has elapsed.
Press the SLEEP/
button on the remote control repeatedly to select the number of minutes.
The display will appear on the screen followed by circle, OFF, 5, 10, 15, 30, 45, 60, 90, 120, 180 and 240 minutes.
Sleep Timer: Off
RETURN FUNCTION
When you are looking TV programs ,you can press the 
button on the remote control to return to the previous channel.
SOURCE INPUT SWITCH
1.Press SOURCE/
button on the remote control to the source menu.
The source menu rank as: TV - AV -
2.Press▼ / ▲ button on the remote control to select the source in the menu.
When the bar highlighted means the covering source selected, then press ENTER / 
to confirm.
INPUT SOURCE
PROGRAM SELECTION
Press the CH +/CH- button on the control panel or the Numerical on the remote control.
TV
AV
DVD
Component
HDMI
VGA
20 | 21 |