Symphonic CWR20V4 owner manual Troubleshooting, Symptom Remedy, Power, Picture, Sound

Page 97

Others

Troubleshooting

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom

Remedy

Power

 

 

 

The power does not turn on.

• Check that the AC power cord is connected securely.

 

 

 

 

Picture

 

 

 

There is no picture.

• Re-connect the connecting cord securely.

 

• The connecting cords are damaged.

 

• The Setup Display appears. Press SETUP or RETURN

 

button

 

 

 

 

 

to turn off the display.

 

• Check the connection to your TV (page 13).

 

• Check the RF output channel when you view a TV program

 

using RF connection.

 

• Switch the input selector on your TV (such as to "LINE1") so

 

that the signal from this unit appears on the TV screen.

 

 

 

 

Picture noise appears.

• The disc is dirty or flawed.

 

• Head cleaning for VCR may be necessary.

 

Refer to “AUTO HEAD CLEANING”.

 

• If the picture output signal from the unit passes through your VCR

 

to get to your TV, or if you are connected to a combination

 

TV/VIDEO player, the copy-protection signal applied to some DVD

 

programs could affect picture quality. If you still experience this

 

problem even when you connect the unit directly to your TV, try

 

connecting the unit to your TV's S-VIDEO input.

 

• Adjust tracking control for better picture by pressing

 

CHANNEL (o / p) buttons on this unit or CH ( o / p)

 

buttons while you are playing a video tape.

 

 

 

 

TV program reception does not fill the

• Try to set the channels with "Auto Preset" in SETUP menu

screen.

(page 18).

 

• Select a channel of any TV program using the CH o / p buttons.

 

• Press VIDEO/TV button if necessary.

 

 

 

 

TV program pictures are distorted.

• Adjust TV antenna.

 

• Adjust the picture (see the TV's instruction manual).

 

• Place the unit and TV farther apart.

 

• Place the TV and any bunched antenna cables farther apart.

 

 

 

 

TV channels cannot be changed.

• Switch the input to TV.

 

• Connect the antenna cable correctly (page 13).

 

 

 

 

The playback picture or TV program from

• If the playback picture output from a DVD player,VCR, or tuner

the equipment connected through the

goes through the unit before reaching your TV, the copy-

unit is distorted.

protection signal applied to some programs could affect picture

 

quality. Disconnect the playback equipment in question and

 

connect it directly to your TV.

 

 

 

 

Sound

 

 

 

There is no sound.

• The disc is dirty or flawed.

 

• Re-connect all connections securely.

 

• The connecting cord is damaged.

 

• Check the connections to the amplifier input.

 

• The input source setting on the amplifier is incorrect.

 

• The unit is in pause mode or in Slow-motion Play mode.

 

• The unit is in fast forward or fast reverse mode.

 

• If the audio signal does not come through the DIGITAL AUDIO OUT

 

(COAXIAL) jack, check the Audio Setup settings (pages 90-91).

 

 

 

 

Sound is noisy.

• The disc is dirty or flawed.

 

• When playing a DTS-CD, noise may come from the speakers.

 

This unit is not compatible with DTS-CD.

 

 

 

 

No DTS sound is output

• This unit is not compatible with DTS sound.

Before you start Connections Getting started Recording Playing discs Editing Changing the SETUP menu VCR functions Others

97

Français

Page 96 Page 98
Image 97
Page 96 Page 98
Contents Menu VCR functions Others Français Supplied AccessoryLaser Safety PrecautionsModel No Serial No Before you Precautions cont’dMaintenance Installation LocationMoisture Condensation Warning About CopyrightTable of contents Recording FeaturesPlay Editing222120191817 Functional overview1211 StartFunctional overview cont’d Start Connections Getting started Recording Playing discs VCR/DVD recorder SwitchingEditing SETUP/DISC/CD menu First DVD Display menuFirst VCR Disc type and Current status of the unit Display messageRecording speed Title/Track and Chapter markMethod 2 and method 3 are only useful in DVD mode Antenna Cable Signal ConnectAntenna Cable DisconnectTo select channels of the cable box or satellite box Connection to a cable box or satellite boxTo playback a DVD disc or a tape To view one channel while recording anotherStart Connections Connection to an Audio SystemGetting started Recording Easy DVD recording Remote ControlThis unit can record on the follow- ing type of discs only Turn on the unitDesired channel Discs Easy DVD recording Cont’dGetting channels auto- matically Channel settingSelect Manual Preset using Buttons, then press Enter button Channel setting cont’dManual Preset menu will appear Select Channel using K / L Buttons, then press Enter buttonOption window will appear Selecting the TV stereo or SAPOutputs main-audio Secondary Audio ProgramAuto Clock Setting Clock settingManual Clock Setting Clock setting cont’dClock menu will appear, then the settings will be activated Select on or OFF using Buttons, then press Enter button Setting the daylight sav- ing timeDaylight Saving Time options will appear If you have a standard TV Selecting the TV aspect ratioIf you have a widescreen TV Information Information on DVD recordingRecording speed Restrictions on recordingInformation on DVD recording cont’d Disc type ModeInformation on copy control Making discs playable in other DVD player FinalizeSETUP/DISC menu will appear Screen Settings for the recording format to a blank discSelect Setup using / B Formatting a discDefault Select Auto Chapter usingPress Setup button to exit Setup menu Formatting a disc cont’dSelect Format using K / L buttons, then press Enter button Select Yes using / B but- tons, then press Enter but- tonReformatting a disc Formatting is completeBasic recording Checking the recording picture quality Basic recording cont’dXP SP LP First DVD Press REC Monitor button again to exitOne-touch timer recording Timer recording Press Enter button when all information required is entered Timer recording cont’dPress Power button to turn off To stop the timer recording in processPriority of overlapped settings Hints for timer recordingSelect the input jack type to connect using Settings for an external sourceConnection to an external source Select a recording speed using REC Speed button. Refer to Settings for an external source cont’dRecording from an external source Recording speed on page 26 for DVD or page 94 for VCRDubbing Mode DVD to VCR duplication will start VCR to DVD duplication will startFinalizing the discs Disc will be protected Setting a disc to protect→ OFF at , then select Yes Information on DVD play Playback Basic playbackBasic playback cont’d When selecting trackFor MP3 playback Press Play B button to start playingPlaying discs using the disc menu First DVD Press TOP Menu button Playing discs using the title menuTOP Menu button Press TOP Menu button to exit the title menuResume play Special playbackFast forward / Fast reverse Skipping TV commercials during play Special playback cont’dPause During playback, press CM Skip buttonSlow forward / Slow reverse play Step by step playbackPress Skip G button repeatedly To play step by step back- wardZoom Marker SetupUsing Display button Using Skip H / G buttonsSearch Title/Chapter searchTrack search Search cont’dTime search Able only in the same track orRepeat play Repeat/Random/Program playRandom play Repeat/Random/Program play cont’d Select Program Play using Buttons, then press Enter buttonProgram play Press Play B button to start program playbackSelecting the format of audio and video Switching audio soundtrackSelecting the format of audio and video cont’d Switching subtitlesSelect a desired option using Buttons, then press Switching camera anglesSelect Icon using / B Reducing block noiseInformation on disc editing Editing discs in Video modeGuide to a title list Playback status of the current discInformation on disc editing cont’d Editing discs in VR modeEditing original titles Editing playlistsDeleting titles Editing DVD-RW discs in Video modePutting names on titles Editing DVD-RW discs in Video mode cont’dThis operation may take a Name you entered will be activated for the titleSelect Chapter Mark using Setting or clearing chapter markersSelect Yes using / B but- tons, then press Enter but Ton Chapter markers will be added at the specified time pointsOriginal/PlayList menu will appear Editing DVD-RW discs in VR mode OriginalOriginal list will appear Deleting parts of titles Editing DVD-RW discs in VR mode Original cont’dSelect Delete using K / L buttons, then press Enter button Window for entering a title name will appear Name you entered will beActivated for the title Select Chapter Mark using Buttons, then press Enter button Select a desired title using KEnter button Original menu will appear Option window will appear. AddChapter marker which you Setting pictures for thumbnailsSelected will be deleted While to be completedPicture for thumbnail will be set Setting titles to protect Releasing titles from protecting Titles protecting feature once pro- tectedYou are allowed to release Protect on → OFF is selectedSelect PlayList using / B buttons, then press Enter button Editing DVD-RW discs in VR mode PlaylistPlaylist menu will appear Playlist will appearInstructions continue to the next Editing DVD-RW discs in VR mode Playlist cont’dOriginal/PlayList menu will appear Screen Select PlayList using / BPlaylist will appear Name you entered will be Select Edit Title Name using K / L buttons, thenActivated for the title First DVD Select a desired title using K Delete Chapter marker which you Selected will be deleted Select Edit using K / L but- tons, then press Enter butSelect Yes using / B but- tons, then press Enter but- ton Adding titles to a Playlist Playlist as you prefer Select Add New Title usingYou can add or delete a title B buttons, thenPlaylist can be deleted if no longer needed Deleting a PlaylistPlaylist will be erased Ing time on discEditing DVD-R discs Select Title Delete using KYou cannot select Chapter Mark Editing DVD-R discs cont’d Tour of the Setup menu Changing the Setup menuPress Setup button to display SETUP/DISC menu Settings for LanguageSettings for Language cont’d Setup Display Settings for DisplayOSD Background Transparency Default 35% Settings for Display cont’dOSD Background Color Default 1 Green OSD Language Default English Set the language for OSDChoose the appropriate Audio settings for your equipment Settings for AudioIt will only affect DVD discs during playback Settings for Audio cont’d Settings for Parental lock level Settings for Parental lock level cont’d Press Stop button when the recording is completed Recording and One-touch timer recordingPlayback First VCR Press REC/OTR button to begin the recordingOne-touch timer recording Recording and One-touch timer recording cont’dIndex search When you playback a tape recorded in Hi-Fi stereo Counter ResetOther operations Press g/h buttons to start time searchSymptom Remedy TroubleshootingPower PictureRecording/Timer recording/Editing Troubleshooting cont’dPlayback Cause Solution Remote controlOthers RF converter output Press VIDEO/TV button on the remote controlSelect channel 3 on your TV For more than101 Language codeLanguage Code Glossary 103 SpecificationsReceivable channels RF ConverterEnregistrement simple de DVD TélécommandeRemarque DVD-R ordinaire Ver 2.0/8xEnregistrement simple de DVD suite ’appareil passera en pause et le son sera assourdi Lecture avec magnétoscope106 Pendant la lecture, appuyer sur la touche Pause FEnregistrement avec minuterie par simple pression EnregistrementFunai Corporation Limited Warranty
Top Page Image Contents