Sharp DV-RW2U manual TV Program Recording, Pause Recording, Press STILL/PAUSE during Recording

TV Program Recording

POWER	TIMER	DISC	OPEN/
	ON/OFF	TIMER	CLOSE
ANGLE	AUDIO	CH
SETUP/	DNR	ZOOM	INPUT
FUNCTION
TITLE			MENU
RETURN			SET/
			ENTER
			VCR PLUS+
		TIMER PROG.
			REC MODE
AM/PM		ERASE PROGRAM
100
REV			FWD
	PLAY
REC		STILL/PAUSE
	STOP
SKIP	F.ADV		SLOW
SEARCH	SKIP
DISPLAY	ON	ORIGINAL/	EDIT
	SCREEN	PLAY LIST
POWER	INPUT	VOL

CH

TV CONTROL

NOTE

•Recorded images may not appear correctly on the screen when viewing broadcasts with poor reception. This may be improved by resetting “3D Y/C” to “OFF” (page 91).

•Discs edited with another recorder that contain more than 201 chapter marks cannot be edited (or recorded) with this recorder.

•Discs on which parts have been added or erased more than 51 times for a single title with another DVD recorder, and discs that are protected cannot be edited (or recorded).

•Titles for which recording has been interrupted due to a scratched disc, soiled disc or other reason are displayed with an exclamation point “!” in front of the title displayed on the DiscNavi menu and so forth.

When Recording Discs are Scratched or Soiled

•Recording may be temporarily interrupted at those portions of a disc that cannot be recorded as a result of being scratched or soiled. When recording is resumed, the portion where recording starts is recorded as a different title. When a disc is unable to be recorded, “INCORRECT TYPE. REMOVE DISC.” will appear and all other functions of the recorder will be disabled except for opening and closing of the tray. Take out the disc when this happens.

•When recording in the Video mode, a maximum of about 60 seconds of recorded material prior to the point where recording is interrupted may be lost.

Pause Recording

DVD RW	DVD RW	DVD R
VR MODE	VIDEO MODE

1 Press STILL/PAUSE during

recording.

•This function does not work during timer recording and Simple Recording Timer.

•Although the channel can be changed while recording is paused, the recorded title does not change. (The name of the title is the same as that of the previous channel.)

2 Press STILL/PAUSE or ÆREC

to start recording again.

NOTE

•In the case of a VR mode disc, a chapter mark is automatically inserted at the location where recording is paused.

•When recording onto a DVD-RW disc, the channel cannot be changed if recording is

paused by pressing STILL/PAUSE immediately after having pressed ÆREC.

49

DV_RW2U#p45-53.p65 49 03.1.9, 7:39 PM