Sharp DV-RW2U About Recording, VR Video Recording Mode, Video Mode, DVD-RW Discs, DVD-R Discs

Page 9

About Recording

Recording Format

•There are two recording formats available with this recorder consisting of the VR mode and Video mode.

•The recording format that can be selected may differ depending on the disc. Refer to the section on Discs and Recording Formats.

VR (Video Recording) Mode

The VR mode is the basic DVD-RW recording format, and lets you enjoy the various editing functions available with this recorder.

•When a disc has been recorded in the VR mode, it can be recorded and erased repeatedly. Erasure also allows the recording time to be increased.

•Recorded discs can only be played back with DVD- RW-compatible DVD players*1.

•“Copy-once” programs can also be recorded*2.

*1: • Although there are some cases in which the disc must be finalized, the disc can be recorded and erased after it has been finalized.

•The following mark is indicated on DVD-RW- compatible DVD players.

This mark indicates that the player on which it is indicated has the function of being able to play back DVD-RW discs recorded in the VR mode with a DVD recorder.

*2: When using a disc compatible with DVD-RW Ver. 1.1 (CPRM). Recorded programs cannot be played back with other DVD players (including DVD-RW players) or DVD recorders not compatible with CPRM.

Video Mode

This recording format is compatible with commercially available DVD players and DVD-ROM drives.

•Discs recorded in the Video mode can be played back with other DVD players by finalizing them after recording. (However, this does not guarantee that these discs can be played back on all DVD players.)

•When recording in the Video mode, discs can be played back, additionally recorded and edited only with this recorder until they are finalized. Editing- functions are limited.

•Recordings onto DVD-R/RW discs using the Video mode (video format) employ a new standard approved by the DVD Forum in 2000, and compatibility with this standard is left to the discretion of the respective DVD player manufacturer. Consequently, there are some models of DVD players and DVD-ROM drives that are unable to play back DVD-R/RW discs.

•“Copy-once” programs cannot be recorded.

Discs and Recording Formats

•DVD-RW and DVD-R discs can be recorded with this recorder. The recording format that can be selected may vary according to the disc version and types of disc.

Types of Discs

Recording Formats

 

 

 

VR Mode

Video Mode

 

 

 

DVD-RW Ver. 1.1

⋅

⋅

 

 

 

DVD-RW Ver. 1.1

⋅

⋅

(CPRM compatible)

 

 

 

 

 

DVD-R

—

⋅

 

 

 

Make sure to use a disc that has the words “For Video” or “For recording” on the disc or disc jacket for recording and playback with this recorder.

DVD-RW Discs

•DVD-RW discs are available in Ver. 1.1 or Ver. 1.1 (CPRM).

•Ver. 1.1 discs can be recorded in either the VR mode or Video mode*1.

•In the case a disc has been recorded in the VR mode, it can be recorded and erased repeatedly. Erasure also allows the recording time to be in- creased.

•In the case a disc has been recorded in the Video mode, although additional recordings can be made until the disc is full, recording time cannot be increased by erasure*2.

•When a disc is initialized, all of its recorded contents can be erased allowing it to be recorded even if it has been recorded in the Video mode. (Refer to pages 12 and 88 regarding initialization.)

*1: Recordings in the VR mode and Video mode cannot be mixed on one disc.

*2: Recording time can only be increased when the last title is erased (titles cannot be erased after a disc has been finalized).

DVD-R Discs

•DVD-R discs can only be recorded in the Video mode.

•Although additional recordings can be made until the disc is full, disc space does not increase even if titles are erased (because erasure here refers only to making the titles not visible).

•Although these discs can be played back with other DVD players once they have been finalized, the discs can no longer be recorded or erased after they have been finalized.

•Discs can be additionally recorded and edited with this recorder only until they are finalized.

Important!

This recorder cannot be used to record CD-R or CD-RW discs.

9

DV_RW2U#p02-11.p65

9

03.1.9, 7:30 PM

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Do not press the Power button until completion of EZ Set Up Then, plug into AC Power OutletEZ SET UP complete. EZ SET UP completo Detail Please see For this recorder isInformation Expose this Appliance to Rain or MoistureImportant Safeguards Contents Contents Features Types of Discs that Can Be Played on This Recorder About DiscsDiscs that Cannot be Played Discs For Recording and PlaybackAbout MP3 file format About DiscsDiscs with unusual shapes cannot be played ˝ Playing MP3 discsVideo Mode VR Video Recording ModeAbout Recording DVD-RW DiscsAbout Recording Recording TimeDisc Remaining Time DVD-RW disc Video mode DVD player or DVD Using the Proper DiscUnrecordable Material Objective Disc UsedInitialization and Finalization About the Contents of the DiscAbout the Contents of the Disc Handling Precautions Precautions During UseCleaning the Pick Up Lens Proper Disc StorageMajor Components Simple Timer Recording indicator P.51Main Unit Front Front Panel DisplayMain Unit Rear Major ComponentsLoading the Batteries Remote Control UnitSetting the Remote Setting the Manufacturer’s CodeSetting the Remote Control Code Setting the Remote Control CodeBasic Conneciton Easy ConnectionAfter the Connection Connecting Using Component Video Output Connecting Using an S-Video OutputUsing Other Types of Video Output Plug in the power cords of the TV. Then go to EZ Set Up seeConnect the TV antenna Coaxial cables as Shown on the left Connecting to a Cable Box or Satellite ReceiverConnect the VIDEO/AUDIO After the ConnecitonCatv or Satellite Receiver Connections EZ Set Up Important! Caution during EZ Set UpPower Channel Setting Channel SettingAdding Channel Memory Erasing Channel Memory EnterAuto Clock Setting Clock SettingPress / to select Auto and then press SET/ENTER Press \ / to select Time ZoneClock Setting Manual Clock SettingAutomatic Daylight Saving-Time D.S.T Adjustment Press SETUP/FUNCTION to Display the Menu screen OSD Language SettingStandby Display InformationPlayback the playback-only discs PlaybackDVD Playback Resume FunctionPlayback Playback After Confirming Contents with DiscNaviPlayback by Selecting a Title Video CD/Audio CD/CD-R CD-RW PlaybackSelected Track Playback Fast Forward/Fast Reverse Skip Forward/ReverseSlow-Motion Skip Search Still/Pause Frame AdvancePress STILL/PAUSE during Playback Press F.ADVTo Play Another File music title during Playback MP3 Discs PlaybackTo Skip the File during Playback SkipAngle Function Zoom FunctionPress Zoom during playback Press Zoom to return to Normal screenAudio Setting Monitor Output when Receiving a Stereo or SAP BroadcastChanging Image/Audio During Playback DNR Digital Noise ReductionTitle/Track Programmed Playback Programmed PlaybackPress Program while the disc Is stopped Press Stop to stop the pro Grammed playbackChapter Programmed Playback Programmed PlaybackPress Program twice while Disc is stopped Press Stop to stop Programmed playbackRepeat Playback Repeat PlaybackExample DVD video disc Function ControlFunction Control Direct Skip Title/chapter/trackDirect Time Skip Example Subtitle language setting Subtitle/Angle Audio SettingAbout the subtitle setting About the Audio settingDolby Virtual Surround Clearer Picture Dynamic Sound SettingExample Setting Digital Gamma Press SETUP/FUNCTION orWhile the on is displayed, press \ / to select the level You can go on to specify other setingsDirect Selection of Scenes Selecting Scenes by Title NumberDisc Menu Screen Recording for DVD Discs Initializing in the VR ModeBefore Starting Recording InitializationRecording for DVD Discs Initializing in the Video ModeRecording Formats and Recording Modes Disc InformationTV Program Recording Press REC Mode to select Recording modeBasic Recording Press CH / to select the TV Channel to recordTV Program Recording When Recording Discs are Scratched or SoiledPause Recording Press STILL/PAUSE during RecordingStop Recording Useful Recording FunctionsPress Stop during recording Changing the Settings Simple Recording Timer Simple Recording TimerCancelling the Simple Recording Timer Simple Recording Timer has priority over other recordingsPress Power and load a Recordable disc Press VCR PLUS+ to display VCR PLUS+ setting screenPress number buttons to enter Pluscode NO. and then press Checking/Cancelling the VCR Plus+ Programming System Timer Recording with VCR Plus+ SystemPress Timer ON/OFF to enter Timer standby mode Press Return to return to Normal screenPress Timer PROG. to display Timer Program screen Timer RecordingPress / to select the recording Mode Turn on the recorder and load a Recordable discTimer Recording Press Power and then load a DVD-RW disc Disc Timer RecordingPress and hold Disc Timer for More than 2 seconds Press Timer ON/OFFCanceling the Disc Timer Recording Disc Timer RecordingPress Power When Finished Using the RecorderLoad a disc to be used for timer Recording TimerSee 2/2 screen also EraseConnecting to a Satellite Receiver, etc Recording withExample Use of AV Auto REC Function Before Recording Press Power To Cancel the AV Auto REC FunctionBlinking the Timer Indicator Problems of Timer RecordingWhen Timer Recording Times Overlap Front Panel Display Causes SolutionEditing the Disc Editing ProcedureAbout Editing Before Editing the DiscEditing the Disc Switching between Playlist and Original PlaybackErasing a Part from Original Editing an Original TitleInputting/Renaming Title Editing an Original TitleAdding Chapter Markers Press / / \/to select the title Then press SET/ENTERMarkers Erasing ChapterSET/ENTER NavimarkReturn Protecting the TitleCancelling the Protection Erasing One Title Erasing All TitlesMaking a New Playlist PL Press ORIGINAL/PLAY List to Select Playlist modeMaking a Playlist from Original Title Press / to select Title Then press SET/ENTERAdding a Part to Playlist Making a New Playlist PLPress SET/ENTER to set Start point of the part Press SET/ENTER to set the endSearching for Start Point End Point Parts Erasing a Part from Playlist Editing a Playlist TitleMoving the Title Perform the steps 2 to 8 Erasing a Part from the OriginalAdding a Part from Original to the Playlist Editing a Playlist TitlePress SET/ENTER Press / /\/ to select the title Press / to select ADD Part and then press SETWhen adding chapter markers during editing Adding Chapter Marker PlaylistPerform the steps 2 to 7 Adding Chapter Markers on Renaming the Title Erasing Chapter Marker in a PlaylistPerform the steps 2 to 8 Erasing Chapter Marker on Perform the steps 2 to 8 Navimark onTamper Proof Tamper Proof SettingDisengaging Tamper Proof Operating during Tamper ProofOFF Playback Setup ScreenPlayback Setup Screen Dolby Digital Output LevelDigital OUT Basic Settings Playback Setup Screen Parental Level SettingSive Country Code List Cursor is moved to Level and then press \ / to selectLevel Press / to select Disc LANG. and then press Disc Language SettingPress / to select SUB TitleCode Language Name Language Code List for Disc LanguageRecord Setup Screen Select the sound input from the external sourceThis does not apply if recording from the DV input Record Setup Screen Basic Settings Record Setup ScreenREC DVD-R discs cannot be initialized Disc Setup ScreenSetup Screen Basic Settings of the DiscPress / to select VR Mode Initialize and then press Press / to select Disc Then press SET/ENTERClock Disp Option Setup Screen3D Y/C Option Setup ScreenPress / to select Option Then press SET/ENTER Basic Settings Option Setup ScreenPress / to select Clock DispPlaying 2 channel audio with an Analog Connector Connecting to Audio EquipmentDD Level in Playback Setup to OFF See Playing Dolby DigitalPlaying 2 channel audio with a Digital Connection Connecting to Audio EquipmentDV IN/OUT Terminal Connecting Using the DV IN/ OUT Terminal i.LINKRecording with this recorder DV Uptake Play back the recorded material with this Recorder Recording with a Digital CamcorderRecording with this Recorder Perform the procedure for recording with this RecorderPress Input to set to the channel External input Load a disc for recording in the recorderPlace a disc for recording in this recorder Recording Material from External EquipmentProblem Suggested Solution TroubleshootingTroubleshooting Service Informatino For the U.SAngle Glossary103 GlossaryGeneral SpecificationsGuía de operación rápida Español106 InformacionAviso al instalador de sistemas Catv 107 Medidas DE Seguridad ImportantesConexión básica EZ Set Up108 NotaReproduce solamente los Guía de operación rápida en españolDiscos para reproducción Sobre la grabadoraAvance de cuadro Imagen fija/pausa Omisión Avance/RetrocesoCámara lenta 110Pulse REC Mode para seleccionar el modo de grabación Salida de VIDEO/AUDIO Pulse POWER. La grabadora seGrabación básica 111Valid for warranty service in the U.S. only DV-RW2U DVD RecorderOr Call 1-800-BE-SHARP
Top Page Image Contents