Sharp DV-RW2U manual Recording with this recorder DV Uptake

Page 96

Connecting to Audio Equipment

Recording with this recorder (DV Uptake)

You can record images from a digital camcorder connected to the DV IN/OUT terminal of this recorder. You can also control the operation of the camcorder with the remote control provided with this recorder, making it easy to record material from a camcorder onto a disc.

Record material from a camcorder after first setting the “DV AUDIO IN” (page 91) of “OPTION SETUP”.

NOTE

•Material protected with a copy guard cannot be recorded.

•Date and time data as well as the contents of cassette memory cannot be recorded.

•Discs cannot be played back when “DV LINK” is set to “ON” during DV input. Set the “DV LINK” to “OFF” when you want to play back recorded material.

•The video and audio signals of Audio CDs or Video CDs are not output.

•The video and audio signals of protected material or copy-once material are not output.

1 Setup

1Connect the digital camcorder to the DV IN/OUT termial.

•Set the power switch of the camcorder to “Video (Playback)” and connect while it is stopped.

This recorder

POWER

 

 

 

 

OPEN/CLOSE

CHANNEL

TIMER ON/OFF

 

 

 

 

 

 

 

 

 

 

REC

 

 

 

 

 

DISC

 

 

 

 

DV IN/OUT

S-VIDEO

VIDEO

L(MONO)-AUDIO-R LINE IN 2

STANDBY

TIMER

STILL/PAUSE

PLAY

STOP

RESET

 

 

 

 

SKIP

 

 

DISC IN

 

AV

 

 

 

 

 

 

 

TIMER

AUTO REC

 

 

 

 

To DV IN/OUT

terminal

Digital camcorder

To DV terminal

DV cable

(Commercially available)

2Place a disc for recording in the recorder.

2 Select the external input audio.

•Before starting recording, check the setting of “DV AUDIO IN” (page 91).

•Monaural audio cannot be input through the DV IN/ OUT terminal.

3 Press INPUT.

•The setting changes in the order of DV (DV Input), L 1 (External Input 1), L 2 (External Input 2), L 3 (External Input 3), Channel and then back to DV (DV Input) each time this is pressed.

•When “DV LINK” is set to “ON”, the digital camcorder can be controlled with the remote control of this recorder.

•The following buttons can be used:

PLAY, FWD, REV, ■STOP, SLOW and

STILL/PAUSE.

DV LINK

REC DISC REC

4 Begin playback of the digital camcorder.

5 Press ÆREC where you want to start record- ing.

•This recorder begins to record.

•Recording by this recorder pauses if there is a portion of the digital camcorder playback where nothing has been recorded or playback is stopped during recording. When a recorded portion of the playback is again played back, pause is canceled and recording resumes.

6 Pause recording (as necessary).

When “DV LINK” is “ON”: Press ÆREC.

When “DV LINK” is “OFF”: Press STILL/PAUSE.

DV LINK

ENTER DISC STOP

REC DISC REC

7 Stop (end) recording.

When “DV LINK” is “ON”: Press SET/ENTER.

When “DV LINK” is “OFF”: Press ■STOP.

Refer to the section on “Troubleshooting” (page 100) when DV uptake does not function properly.

Important!

Abnormal images may be recorded when any of the following occur during DV uptake.

•When connected equipment plays back a portion where nothing is recorded

•When the DV cable is disconnected or the camcorder power is turned off during DV uptake

•When playback from the camcorder is stopped

96

DV_RW2U#p86-99.p65

96

03.1.14, 9:30 AM

Page 95 Page 97
Image 96
Page 95 Page 97
Contents Then, plug into AC Power Outlet Do not press the Power button until completion of EZ Set UpEZ SET UP complete. EZ SET UP completo Detail Please see For this recorder isExpose this Appliance to Rain or Moisture InformationImportant Safeguards Contents Contents Features About Discs Types of Discs that Can Be Played on This RecorderDiscs that Cannot be Played Discs For Recording and PlaybackAbout Discs About MP3 file formatDiscs with unusual shapes cannot be played ˝ Playing MP3 discsVR Video Recording Mode Video ModeAbout Recording DVD-RW DiscsAbout Recording Recording TimeDisc Remaining Time Using the Proper Disc DVD-RW disc Video mode DVD player or DVDUnrecordable Material Objective Disc UsedAbout the Contents of the Disc Initialization and FinalizationAbout the Contents of the Disc Precautions During Use Handling PrecautionsCleaning the Pick Up Lens Proper Disc StorageSimple Timer Recording indicator P.51 Major ComponentsMain Unit Front Front Panel DisplayMajor Components Main Unit RearRemote Control Unit Loading the BatteriesSetting the Manufacturer’s Code Setting the RemoteSetting the Remote Control Code Setting the Remote Control CodeBasic Conneciton Easy ConnectionAfter the Connection Connecting Using an S-Video Output Connecting Using Component Video OutputUsing Other Types of Video Output Plug in the power cords of the TV. Then go to EZ Set Up seeConnecting to a Cable Box or Satellite Receiver Connect the TV antenna Coaxial cables as Shown on the leftConnect the VIDEO/AUDIO After the ConnecitonCatv or Satellite Receiver Connections EZ Set Up Important! Caution during EZ Set UpPower Channel Setting Channel SettingAdding Channel Memory Erasing Channel Memory EnterClock Setting Auto Clock SettingPress / to select Auto and then press SET/ENTER Press \ / to select Time ZoneClock Setting Manual Clock SettingAutomatic Daylight Saving-Time D.S.T Adjustment OSD Language Setting Press SETUP/FUNCTION to Display the Menu screenDisplay Information StandbyPlayback Playback the playback-only discsDVD Playback Resume FunctionPlayback After Confirming Contents with DiscNavi PlaybackPlayback by Selecting a Title Video CD/Audio CD/CD-R CD-RW PlaybackSelected Track Playback Fast Forward/Fast Reverse Skip Forward/ReverseSlow-Motion Still/Pause Frame Advance Skip SearchPress STILL/PAUSE during Playback Press F.ADVMP3 Discs Playback To Play Another File music title during PlaybackTo Skip the File during Playback SkipZoom Function Angle FunctionPress Zoom during playback Press Zoom to return to Normal screenMonitor Output when Receiving a Stereo or SAP Broadcast Audio SettingChanging Image/Audio During Playback DNR Digital Noise ReductionProgrammed Playback Title/Track Programmed PlaybackPress Program while the disc Is stopped Press Stop to stop the pro Grammed playbackProgrammed Playback Chapter Programmed PlaybackPress Program twice while Disc is stopped Press Stop to stop Programmed playbackRepeat Playback Repeat PlaybackFunction Control Example DVD video discFunction Control Direct Skip Title/chapter/trackDirect Time Skip Subtitle/Angle Audio Setting Example Subtitle language settingAbout the subtitle setting About the Audio settingClearer Picture Dynamic Sound Setting Dolby Virtual SurroundPress SETUP/FUNCTION or Example Setting Digital GammaWhile the on is displayed, press \ / to select the level You can go on to specify other setingsDirect Selection of Scenes Selecting Scenes by Title NumberDisc Menu Screen Initializing in the VR Mode Recording for DVD DiscsBefore Starting Recording InitializationInitializing in the Video Mode Recording for DVD DiscsRecording Formats and Recording Modes Disc InformationPress REC Mode to select Recording mode TV Program RecordingBasic Recording Press CH / to select the TV Channel to recordWhen Recording Discs are Scratched or Soiled TV Program RecordingPause Recording Press STILL/PAUSE during RecordingStop Recording Useful Recording FunctionsPress Stop during recording Simple Recording Timer Changing the Settings Simple Recording TimerCancelling the Simple Recording Timer Simple Recording Timer has priority over other recordingsPress Power and load a Recordable disc Press VCR PLUS+ to display VCR PLUS+ setting screenPress number buttons to enter Pluscode NO. and then press Timer Recording with VCR Plus+ System Checking/Cancelling the VCR Plus+ Programming SystemPress Timer ON/OFF to enter Timer standby mode Press Return to return to Normal screenTimer Recording Press Timer PROG. to display Timer Program screenPress / to select the recording Mode Turn on the recorder and load a Recordable discTimer Recording Disc Timer Recording Press Power and then load a DVD-RW discPress and hold Disc Timer for More than 2 seconds Press Timer ON/OFFDisc Timer Recording Canceling the Disc Timer RecordingWhen Finished Using the Recorder Press PowerLoad a disc to be used for timer Recording TimerErase See 2/2 screen alsoConnecting to a Satellite Receiver, etc Recording withExample Use of AV Auto REC Function To Cancel the AV Auto REC Function Before Recording Press PowerProblems of Timer Recording Blinking the Timer IndicatorWhen Timer Recording Times Overlap Front Panel Display Causes SolutionEditing Procedure Editing the DiscAbout Editing Before Editing the DiscSwitching between Playlist and Original Playback Editing the DiscEditing an Original Title Erasing a Part from OriginalEditing an Original Title Inputting/Renaming TitleAdding Chapter Markers Press / / \/to select the title Then press SET/ENTERErasing Chapter MarkersNavimark SET/ENTERProtecting the Title ReturnCancelling the Protection Erasing All Titles Erasing One TitlePress ORIGINAL/PLAY List to Select Playlist mode Making a New Playlist PLMaking a Playlist from Original Title Press / to select Title Then press SET/ENTERMaking a New Playlist PL Adding a Part to PlaylistPress SET/ENTER to set Start point of the part Press SET/ENTER to set the endSearching for Start Point End Point Parts Editing a Playlist Title Erasing a Part from PlaylistMoving the Title Perform the steps 2 to 8 Erasing a Part from the OriginalEditing a Playlist Title Adding a Part from Original to the PlaylistPress SET/ENTER Press / /\/ to select the title Press / to select ADD Part and then press SETWhen adding chapter markers during editing Adding Chapter Marker PlaylistPerform the steps 2 to 7 Adding Chapter Markers on Erasing Chapter Marker in a Playlist Renaming the TitlePerform the steps 2 to 8 Erasing Chapter Marker on Perform the steps 2 to 8 Navimark onTamper Proof Setting Tamper ProofDisengaging Tamper Proof Operating during Tamper ProofPlayback Setup Screen OFFPlayback Setup Screen Dolby Digital Output LevelDigital OUT Basic Settings Playback Setup Screen Parental Level SettingSive Country Code List Cursor is moved to Level and then press \ / to selectLevel Disc Language Setting Press / to select Disc LANG. and then pressPress / to select SUB TitleLanguage Code List for Disc Language Code Language NameRecord Setup Screen Select the sound input from the external sourceThis does not apply if recording from the DV input Record Setup Screen Basic Settings Record Setup ScreenREC Disc Setup Screen DVD-R discs cannot be initializedBasic Settings of the Disc Setup ScreenPress / to select VR Mode Initialize and then press Press / to select Disc Then press SET/ENTEROption Setup Screen Clock DispOption Setup Screen 3D Y/CBasic Settings Option Setup Screen Press / to select Option Then press SET/ENTERPress / to select Clock DispConnecting to Audio Equipment Playing 2 channel audio with an Analog ConnectorDD Level in Playback Setup to OFF See Playing Dolby DigitalConnecting to Audio Equipment Playing 2 channel audio with a Digital ConnectionConnecting Using the DV IN/ OUT Terminal i.LINK DV IN/OUT TerminalRecording with this recorder DV Uptake Recording with a Digital Camcorder Play back the recorded material with this RecorderPerform the procedure for recording with this Recorder Recording with this RecorderPress Input to set to the channel External input Load a disc for recording in the recorderRecording Material from External Equipment Place a disc for recording in this recorderTroubleshooting Problem Suggested SolutionService Informatino For the U.S TroubleshootingGlossary AngleGlossary 103Specifications GeneralEspañol Guía de operación rápida106 InformacionAviso al instalador de sistemas Catv Medidas DE Seguridad Importantes 107EZ Set Up Conexión básica108 NotaGuía de operación rápida en español Reproduce solamente losDiscos para reproducción Sobre la grabadoraOmisión Avance/Retroceso Avance de cuadro Imagen fija/pausaCámara lenta 110Salida de VIDEO/AUDIO Pulse POWER. La grabadora se Pulse REC Mode para seleccionar el modo de grabaciónGrabación básica 111Valid for warranty service in the U.S. only DV-RW2U DVD RecorderOr Call 1-800-BE-SHARP
Top Page Image Contents