ATV (Analogue)/DTV/RADIO buttons
Use the following buttons on the remote control to operate the menu.
ATV: Press to switch to ATV mode. After switching from DTV, radio or external input mode to ATV mode, the TV jumps to the most recently viewed ATV channel.
DTV: Press to switch to DTV mode. After switching from ATV, radio or external input mode to DTV mode, the TV jumps to the most recently viewed DTV channel.
RADIO: Press to switch to radio mode. After switching from DTV, ATV or external input mode to radio mode, the TV jumps to the most recently tuned radio channel.
DTV
When the TV accesses to DTV mode for the first time, you need to run the auto search. To scan all available services in your area, follow the procedures below.
1To watch DTV broadcasts, select “DTV” from auto installation menu (See page 10).
2After setting the channels, you can select a channel using CH a/b or 0 – 9 on the remote control unit (See page 7).
Switching the analogue audio format
You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between NICAM STEREO and MONO.
Stereo mode
|
| BBC1 |
|
|
| BBC1 |
| ATV | 01 |
|
| ATV | 01 |
|
|
|
|
|
|
|
| PAL | B/G |
|
| PAL | B/G |
| NICAM | STEREO |
|
|
| MONO |
|
|
|
|
|
|
|
When receiving a bilingual signal
Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
When you watch the TV for the first time
When the TV powers on for the first time after purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels automatically.
1 To watch the analogue TV, select “Auto |
installation” from Setup menu (See page 10). |
|
| BBC1 |
| ATV | 01 |
|
|
|
| PAL | B/G |
| NICAM | CH A |
|
|
|
|
|
|
|
| BBC1 |
| ATV | 01 |
|
|
|
| PAL | B/G |
|
| MONO |
|
|
|
|
| BBC1 |
| ATV | 01 |
|
|
|
| PAL | B/G |
| NICAM | CH B |
|
|
|
|
|
|
|
| BBC1 |
| ATV | 01 |
|
|
|
| PAL | B/G |
| NICAM | CH AB |
|
|
|
2 After setting the channels, you can select a |
channel using CH a/b or 0 – 9 on the remote |
control unit (See page 7). |
When receiving a monaural signal
Each time you press MPX, the mode switches between NICAM MONO and MONO.
Monaural mode
|
| BBC1 |
|
|
| BBC1 |
| ATV | 01 |
|
| ATV | 01 |
|
|
|
|
|
|
|
| PAL | B/G |
|
| PAL | B/G |
| NICAM | MONO |
|
|
| MONO |
|
|
|
|
|
|
|
20