Basic Functions

Using your DTR remote control

The next few pages of this manual will help you to get the most out of your DTR. It is worth keeping this manual to hand for a few days whilst you get to know how it works. For reference, a few of the basic functions are shown below. Note they are all described in more detail later on in this manual.

Turning your DTR on	press the	button.
Changing channels	press the CH+ or CH- buttons.
Selecting a channel by number	Press the appropriate digits into the number keypad.
Pause Live TV or recorded	Press the top half of the		button.
programmes
Fast Forward	press the	button. Press it again to go forward faster.
Rewind	press the	button. Press it again to rewind faster.
To view the Quick TV Guide	Select the UP or DOWN arrows,
	use all arrows to navigate.

Getting Started


Using the Programme Guide	Press the Guide		button. Navigate using the arrow buttons.
Look at a future day’s programmes	Press the Green		button whilst in the GUIDE.
Setting a Reminder	press the YELLOW		button whilst that programme is
	highlighted in the GUIDE.
Recording a programme from	Press the	button whilst on a highlighted
the Guide	programme in the GUIDE. Then press the				button
	to confirm in your Planned Recordings list.
Viewing Top Up TV programmes	Press the	button whilst in the GUIDE.
Search for a programme by name	Press the Red		button whilst in the GUIDE. Use the
	numbered buttons to enter text.
Using your Programme Library	Your Library is where all of your recorded and Top Up TV
	programmes are stored. Press LIBRARY				to access.
Instant Record	Press the	button and hold for three seconds,
	whilst watching the programme.
Watch whilst still recording	Select a programme to watch from the Planned
	Recordings screen, even if it hasn’t finished yet.
	To stop a recording press and hold			for three seconds.
Customise Top Up TV Anytime	Keep your Top Up TV Channel selections up to date and
	ensure you’re making the most of the disk space available

by selecting option 4 from the main menu (See page24).

This will bring up the Setup menu. Select Option 1 in the Set up Menu to scan for new channels.