Basic Operation
Turning On and Off
To turn on your DTR, press the | button. The red standby |
indicator light will go green. |
|
To turn off your DTR, press the | button. The standby indicator |
light will turn red again. The message ‘OAD’ will indicate the box is updating and that you should wait before pressing any further buttons.
The DTR must be on or left in standby if you want to keep the Programme Guide and Top Up TV programmes updated.
Changing channels
To change channel press the CH+ or CH- buttons. This will move through the channel list one at a time. Note that the channel numbers are not continuous. These are set by the broadcaster and cannot be changed.
If you wish to search for your channel by name, use Quickfind.
uPress the OK button.
vUse the arrow buttons to move the highlighter around the programme names, until the channel you wish to watch is highlighted. (Only some channels are shown inside the box, keep moving left or right to find the rest.)
wPress the OK button again to change the channel.
If you know the channel number you are looking for, enter this using the number buttons. With digital TV there can be up to 3 digits in the number.
A banner with information about the programme currently showing will appear briefly each time the channel changes. For more details on getting programme information, see page 13.
Teletext and interactive services
If your chosen channel has digital text features press the TEXT or coloured buttons to access them. To return to normal viewing press TEXT again. Some services offer interactive features, details of these and how to use them will appear on screen as they occur.
12