Setting Up, Scan for Channels | Sharp TU-TV322H guide

Setting Up

From the MAIN MENU, press 4 or select Set-Up.

Use the UP and DOWN buttons to highlight the sub-menu you wish to enter and press the OK button, or press the number button that is associated with the sub-menu.

If you have trouble scanning for channels or with any aspect of the installation, refer to page 10 for more information or check the Troubleshooting guide in this manual.

Scan for Channels

You will have performed this option automatically as part of the installation process, but if for any reason you wish to re-scan for new channels (if you have moved or have a new aerial for example), make sure that all the connections to your DTR are connected correctly. Select Option 1 in the Set up Menu to scan for new channels. Press the GREEN button to start the automatic search for available channels. To exit, press the BACK button.

Once the scan has started you can cancel it by pressing the RED button.

You can monitor the progress of the search as your DTR first searches for digital broadcast frequencies and then for specific programmes on those frequencies. Finally your DTR will attempt to acquire the Top Up TV Anytime service.

When the scan is complete, the text at the bottom of the screen will say ‘Scan complete’ and the GREEN button will re-appear to enable you to re-scan if required. To exit this menu option, press the BACK button.

Throughout the set-up menus, we will list the available settings within an option. Please note that the DTR factory default will be UNDERLINED. If at anytime your are not sure what setting to make, refer to the relevant page and look for the setting that is underlined.