Download V-CHIP Data, Additional mode Example

Parent Control (V-CHIP operation Continued)

3 Press CH UP (8) or DOWN (9) to select “DOWNLOAD”,		CH
3 Press CH UP (8) or DOWN (9) to select “DOWNLOAD”,
press VOL (+) or (–)to activate “ON”.		CH
		CH
	VOL	VOL


	—	+

4 Press MENU to exit.

LDOWNLOAD V-CHIP DATA

1 If you watch the program with “New Rating System Data”, DOWNLOAD screen will be displayed.

(DOWNLOAD screen)

2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.

NOTE:

•DOWNLOAD would not be started if you don’t watch the program with New Rating System Data.

[3]-B. Additional mode (Example)

1 Repeat steps 1 to 4 of [1] MPAA RATING to access V- CHIP select mode.

2 Press CH UP (8) or DOWN (9) to select “Cdn. ENGLISH	CH
RATINGS”, then press VOL (+) or (–).

	CH
VOL	VOL
—	+

(After download, the new rating data)

	3 You can select “BLOCK” or “– – – – –” (non BLOCK)	CH
	from each RATING by pressing CH UP (8) or DOWN	CH
	(9) and VOL (+) or (–).	CH
	(9) and VOL (+) or (–).

VOL	VOL
—	+

(CANADIAN ENGLISH INDIVIDUAL BLOCK)

4 You can select “BLOCK” or “– – – – –” (non BLOCK)	CH
from each RATING by pressing CH UP (8) or DOWN
(9) and VOL (+) or (–)if your select “Cdn. FRENCH	CH
RATINGS” in step 2.

VOL	VOL
—	+

(CANADIAN FRENCH INDIVIDUAL BLOCK)

LThe screen displays as follows when the picture is blocked due to V-CHIP being activated.

A)PIP (Picture In Picture) is OFF

This is shown as page 17 [L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated].

B)PIP is ON

When the Main Picture is blocked, Main Picture will turn to blue and “V-CHIP has been activated” will be displayed.

(Main and Sub Channel No. are displayed, but Sub Picture is not displayed.)

This message will remain the same on the screen. Cancel the V- CHIP BLOCK temporarily at the V-CHIP TIMER mode or change to other channel in this case.

1 2

(Main Picture screen)

When the Sub Picture is blocked, Sub Picture will turn to blue and “V-CHIP has been activated” will be displayed. This message will remain the same on the screen. Cancel the V-CHIP BLOCK temporarily at the V-CHIP TIMER mode or change to other channel in this case.

1 2

Main

Picture

Sub

Picture

(Main and Sub Picture screen)

V-CHIP TIMER mode during PIP ON

1 2

(V-CHIP TIMER mode)