Sharp 28LF-92H operation manual Program. Programming Menu, To start A.P.S Autostore

•To store the station to the programme number selected, se- lect STORE option using “” or “” button and then press “” or “” button or press “OK” button.

•Now as you had selected the Frequency Search, the tuning mode of the program is stored as Frequency Search Mode.

Note : Channel Search Tuning Mode uses a channel table. The channels and stations at the table may vary from table to table and from country to country. Each channel has an ex- act frequency on the table.

•Frequency Search Tuning Mode does not use a channel table and it is slower than Channel Search Tuning Mode.

•Channel Search Tuning Mode is recommended for the countries which uses standard channel table.

•Frequency Search Tuning Mode recommended for the countries which uses non-standard channel table.

Program. (Programming) Menu

You can use the Program. (Programming) menu to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P.S (AUTOSTORE) function.

•Press “M” button to display the main menu.

•Press “” or “” button to select “PROGRAM.” item, then “” or “” button￿￿￿￿1'(/(7($&￿￿￿￿￿￿￿0(to display￿￿the￿￿￿￿“PROGRAM$,16(578726725(￿￿￿￿￿￿.” menu.

To choose a channel in the PROGRAM. menu:

•Press “” / “”/ “” / “” button. The programme number that you choose is high-lighted in the PROGRAM. menu and you can view the picture of that channel.

Caution:

Using the DELETE or INSERT function it is possible to re- write the current channel list in the PROGRAM menu. This can cause other channels to be changed if they were former- ly in locations affected by this function.

To give a channel name (NAME):

1.Choose the channel you want to give a channel name.

2.Press the RED button to enter the NAME mode.

3.Press “” or “” button to choose the position, and press “” or “” button to choose each character of channel name.

4.Press the RED button to store the channel name.

•To cancel the NAME mode, press the BLUE button.

To delete a channel (DELETE):

1.Choose the channel you want to delete.

2.Press the YELLOW button to enter the DELETE mode.

3.Press the YELLOW button to delete it.

•To cancel this DELETE mode, press the BLUE button.

To change the programme number of a channel (INSERT):

1.Choose the channel you want to change the programme number.

2.Press the GREEN button to enter the INSERT mode.

3.Press “ ” / “ ”/ “” / “” button to choose new programme number.

4.Press the GREEN button to insert the channel to the cho- sen programme number.

•To cancel this INSERT mode, press the BLUE button.

To start A.P.S (AUTOSTORE)

A.P.S. automatically programmes the received channels in your TV’s programme numbers.

1.Press the BLUE button to enter the AUTOSTORE mode.

A warning message$//7&298*02'(￿￿￿￿￿￿￿￿￿￿￿17,18(35(6725'75<appears:,//&$1&(/￿%(￿.￿(5352*5$6('&+8.$$11(/00(6

•To cancel the AUTOSTORE mode, press the “” but- ton.

2.Press “” or “” button to choose the “COUNTRY”, then

press “” or “” button the choose country you are now lo- cated.

3.By pressing the up and down buttons, come to the Tuning Mode item and select the mode at which your TV will run the APS.

4.Press “” or “” button to choose the “CONTINUE”, then

press “” button to start A.P.S. The following message ap-

pears. 79￿￿￿￿￿￿￿￿￿￿￿￿&$$￿31&3/￿6￿￿($/,6(5811,1*￿:$,7

•To cancel the A.P.S., press the “” button.

5.After A.P.S. is finalized, the PROGRAM. menu appears again.

- 15 -

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS15-AK45-SHARP-TV-1.p65 21.01.2004, 08:28