Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
“Use this apparatus in tropical and moderate climates.”
Features
•Remote Control Colour Television
•100 UHF / VHF / Cable channel presets
•Cable Channel Compatible
•Menu Driven functions
•2 Euro connector Sockets
•Front AV sockets
•Front SVHS connector.
•NICAM Stereo
•Full function teletext (Fastext)
•Headphone socket
•Direct Channel access
•APS (Automatic Programming system) Tuning
•Program custom name feature
•Automatic search tuning
•Sleep Timer
•Child lock
•Blue mute on no video signals
•Audio mute on no video signals
•Auto switch of after 5 mins of no signal
•WSS (wide screen signal decoding)
•NTSC playback
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220
•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
Aerial Connections
•Connect the aerial plug to the aerial input socket located at the back of the TV.
How to connect external equipment
See “Connecting external equipment” on page 18.
•See the instruction manuals provided with the external de- vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied dry batteries in the remote control.
1.With your thumb nail, pull up the slit as indicated by the arrow to remove the battery cover.
2.Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment | 9$$$5 | |
|
|
|
|
|
|
3.Replace the battery cover.
Notes:
•Remove batteries if weak or if the unit is not in use for long periods.
•Do not mix old and new batteries.
•Incorrect installation of the batteries may damage the re- mote control.
Switching the TV ON/OFF
You can operate your TV either using the remote control handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV. Then the TV switches itself to standby mode and the RED LED located below the TV turns on.
2- To switch on the TV from
Press a digit button on the remote control so that a program- me number is selected,
or,
Press Power Button and “P/CH+” or
To switch the TV off
•Press the
•Press the power button located on the front of the TV.
- 8 -
21.01.2004, 08:28 |